This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 104.120(a)(4) | IMO Conference Resolution 2 | 2002 | ISPS Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Technology Administration | 15 CFR 1150.3(a) | Federal Standard 595A | 1987 | Color 12199, Blaze Orange | Federal Specifications Standards and Test Methods | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | NEMA All Standards | 2013 | All specifications, standards, and codes without specific reference | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(1) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 80.2(kkkk)(1)(ii) | ASTM D 976 | 2011 | Standard Methods for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-5050 | 1994 | Bomb Preparation Method for Solid Waste, Revision 0 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.137(k) | Drawing No. SA-572-S27 | 1987 | Lower neck force/moment transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Interior Department | 43 CFR 11.36(b)(2) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(D) | ASTM D 1692 | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 63.99(a)(5)(ii)(A) | CA State Regulations | 2010 | California Regulatory Requirements Applicable to the Air Toxics Program | State of California | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(b)(iv) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Coast Guard | 46 CFR 34.01-15(c)(2) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 315 | 1980 | Guide for Detailing of Concrete Reinforcement | American Concrete Institute | |
Environmental Protection Agency | 40 CFR 1065.266(b) | ASTM D6348 | 2012 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 194.22(b) | ASME NQA-3 | 1989 | Quality Assurance Program Requirements for the Collection of Scientific and Technical Information for Site Characterization of High-Level Nuclear Waste Repositories | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.127(f) | Drawing No. 127-0000 | 1987 | Technical drawings and specifications package | Reprographic Technologies | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.3 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Federal Railroad Administration | 49 CFR 214.113(b) | ANSI Z89.1 | 1986 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2) | ASTM A 537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 147.950(a)(3)(v) | LAUIC regulations | 1983 | Amendment to Statewide Order No. 29-B (Amendment concerning the offsite disposal of drilling mud and saltwater) (effective May 20, 1983) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.2 | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IF (Chloroform) | EPA Method 551 | 1990 | Chlorination Disinfection Byproducts, Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 183.340(d)(1) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.397(a)(8)(i) | RUS Bulletin 345-50, PE-60 | 1979 | RUS Specification for Trunk Carrier Systems | Rural Utilities Service, U.S. Department of Agriculture | |
Federal Communications Commission | 47 CFR 80.1101(c)(9) | IMO Resolution A.807(19) | 1995 | Performance Standards for INMARSAT Standard-C Ship Earth Stations Capable of Transmitting and Receiving Direct-Printing Communications | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.925b(k)(1) | ANSI A17.1 | 1987 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-600-R-92-129 | 1992 | Methods for the Determination of Organic Compounds in Drinking Water—Supplement II | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.712(b) | Food Chemicals Codex | 1996 | 1,3-Butylene Glycol | National Academy Press | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
National Archives and Records Administration | 36 CFR 1238.5(c)(4) | AIIM MS19 | 1993 | Standard Recommended Practice--Identification of Microforms | Association for Information and Image Management | |
Environmental Protection Agency | 40 CFR 141.40(c)(1)(vii) | EPA Method 539 | 2010 | Determination of Hormones in Drinking Water by Solid Phase Extraction (SPE) and Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC-ESI-MS/MS), Version 1.0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Federal Communications Commission | 47 CFR 76.640(b)(2)(i) | SCTE 28 (formerly DVS 295) | 2003 | Host-POD Interface Standard | Society of Cable Telecommunications Engineers | |
Food and Drug Administration | 21 CFR 178.3530(a) | ASTM D 381 | 1980 | Standard Method of Test for Existent Gum in Fuels by Jet Evaporation | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-ClO2 E | 2014 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Coast Guard | 46 CFR 10.109(d) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(2)(i) | 30 CFR Chapter I, Subchapter C | 2014 | Explosives and Related Articles; Tests for Permissibility and Suitability | Bureau of Mines, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(E) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III, Analytical Methodology, Section C Fecal Coliform Methods, 5 Most Probable Number (MPN) Method, page 132. | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 56.13015(a) | NB-23 | 1979 | National Board Inspection Code, a Manual for Boiler and Pressure Vessel Inspectors | National Board of Boiler and Pressure Vessel Inspectors | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1203.9 | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(10)(i) | EPA-600-4-91-010 | 1983 | Method 249.1--Atomic Absorption; direct aspiration | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | ASTM D 1179B | 2004 | Standard Test Methods for Fluoride Ion in Water | ASTM International |