This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.060-5(b) | Drawing No. 160.060-1, Sheet 2 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CYM | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (43) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.200(a)(2) | ARUIC regulations | 1981 | Act 105 of 1939, Arkansas Statutes Annotated sections 53-101 through 53-130 (1971 and Supp. 1981); Act 937 of 1979, Arkansas Statutes Annotated sections 53-1301 through 53-1320 (Supp. 1981); Act 523 of 1981 | State of Arkansas | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D4161 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals | ASTM International | |
Coast Guard | 36 CFR 1237.26(a) | ISO 18906 | 2000 | Imaging Materials--Photographic Films--Specifications for Safety Film | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 177(a)(2)(d) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D3559A | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Direct | ASTM International | |
Environmental Protection Agency | 40 CFR 261.21(a)(1) | ASTM D3278 | 1978 | Standard Test Method for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C834 | 1986 | Latex Sealing Compounds | ASTM International | |
Food and Drug Administration | 21 CFR 184.1343(b) | Food Chemicals Codex | 1981 | Locust (carob) bean gum | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(25) | SAE J-826 | 1992 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D5174 | 2002 | Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Mercury | ASTM D6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 46 CFR 111.54-1(c)(2) | IEEE C37.14 | 2002 | IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(1)(iii) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(3)(i) | EPA-600-4-79-020 | 1983 | Method 210.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | ASTM D3558C | 2008 | Cobalt by Graphite Furnace Atomic Absorption | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM B33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Environmental Protection Agency | 40 CFR 60.18(f)(3) | ASTM D1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Aviation Administration | 14 CFR 135.168(F)(1)(iii) | TSO-C126b, | 2012 | 406 MHz Emergency Locator Transmitter (ELT) | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(26) | ASTM D3828 | 2007 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.1.2 | UL 729 | 1976 | Oil-Fired Floor Furnaces | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S7.2 | SAE J-1703 | 1983 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(4) | SAE J-168 | 1970 | Protective Enclosures—Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (41) | APHA Method 5220 B | 2001 | Oil and Grease, partition-gravimetric method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F E | 1997 | Fluoride by Complexone Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7420 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.1033(e)(2) | ASTM D1946 | 1982 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2002.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Ceriodaphnia dubia acute | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(o)(8) | UL 515B | 1997 | Conduit, Tubing, and Cable Fittings | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 431.134(b) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers 2003 | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 58.20-5(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1058 | 1994 | Halogenated Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 1043.1(e) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(S) | EPA Method 637 | 1993 | MBTS and TCMTB by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.2 | 1978 | Lead (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.344(a) | NIST Handbook 44 | 2009 | Specifications, Tolerances, and Other Technical Requirements For Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Mine Safety and Health Administration | 30 CFR 77.901-1 | IEEE 32 | 1990 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 49 CFR 195.3(c) B12 | API 2000 | 1998 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 6.1 | ASTM D6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(f)(15) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(a) | ASTM D2234/D 2234M | 2010 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(c) | ASTM D5198 | 2009 | Standard Practice for Nitric Acid Digestion of Solid Waste | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(d)(5) | NFPA 12 | 2005 | Standard on Carbon Dioxide Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-5(b)(1) | ASTM A36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (4) | ASTM D1890 | 1990 | Standard Test Method for Beta Particle Radioactivity of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2201(b)(3) | TXUIC regulations | 1980 | General Rules of Practice and Procedure, Subchapters A-J (Railroad Commission of Texas, adopted November 24, 1975, revised December 1980) | State of Texas | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(6)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels | American Society of Mechanical Engineers |