This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xv) | ASTM D6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(4) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | ICC/ES All Standards | 2013 | All specifications, standards, and codes without specific reference | International Code Council Evaluation Service | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(9) | CGA S-1.2 | 1963 | Safety Release Device Standards-Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(54) | ASTM D4256 | 1994 | Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (12) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A126 | 1995 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C216 | 1991 | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) | ASTM International | |
Coast Guard | 24 CFR 3280.803(k)(3) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 12A | 2014 | Halon 1301 Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 110.10-1(b)(1) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 60.41b Coal | ASTM D388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Energy Department | 10 CFR 431.96, Table 1 | ISO 13256-1 | 1998 | Water-Source Heat Pumps--Testing and Rating for Performance | International Organization for Standardization | |
Coast Guard | 46 CFR 162.060-28(g)(4)(v) | EPA Publication | 2008 | Vessel General Permit (VGP) requirements (VGP Section 5.8) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | APHA Method 4140 B | 1997 | Fluoride, CIE/UV | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(a)(4)(i) Table Note 8 | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(iv)(1) | ASTM D6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | IAPMO PS 4 | 1990 | Material and Property Standard for Drains for Prefabricated and Precast Showers | International Association of Plumbing and Mechanical Officials | |
Research and Special Programs Administration | 24 CFR 200.925c(a)(1)(iii) | ICBO Uniform Plumbing Code | 1991 | Uniform Plumbing Code including the 1992 Code Changes but excluding Part I—Administration, but including the Appendices of the Code | International Conference of Building Officials | |
Rural Utilities Service | 7 CFR 1755.860(o)(5)(iii) | ASTM D4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (1) | APHA Method 9221 C | 2006 | Estimation of Bacterial Density | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table Note 5 | SCP Method AG-625 | 2001 | Atrazine in Drinking Water by Immunoassay | Syngenta Crop Protection | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(vii) | ASTM D4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM D611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Rural Utilities Service | 7 CFR 1755.505(a) | 7 CFR 1755.860 | 2012 | Filled buried wires | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 282.69(d)(1)(i)(A) | MEUSTP | 1995 | Maine Statutory Requirements Applicable to the Underground Storage Tank Program | State of Maine | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(e) | SAE J-595 | 2005 | Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance and Service Vehicles | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 440 Appendix A | ASTM C971 | 1982 | Duct-work Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(iv) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus—P2O5 or Ca3(PO4)2, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | NIST Handbook H-28 | 1957 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.151-21(m) | ASTM F1014 | 2007 | Standard Specification for Flashlights on Vessels | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(25) | ASTM D2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(3) | 14 CFR 103 | 2012 | Transportation of Compressed Gases | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(1) | SAE 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(f)(1) | FedSpec L-S-300 | 1965 | Sheeting and Tape, Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (37) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 59.505(d) | CAARB Method 310 | 2005 | Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products | California Air Resources Board | |
Environmental Protection Agency | 40 CFR 79.56(e)(3)(i)(A)(4) | ASTM D4814 | 1993 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 147.700(a)(1) | ILUIC regulations | 1977 | Illinois Environmental Protection Act, Illinois ch. 1111/2, sections 1001 to 1051 (Smith-Hurd 1977 Revised Statutes and Supp. 1983), as amended by Public Act No. 83-431, 1983 Illinois Legislative Service, pages 2910 to 2916 (West) | State of Illinois | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (40) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.41(q) | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(21) | ASTM E1918 | 2006 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1000(f)(2) | USACE EM-385-1-1 | 1967 | General Safety Requirements | Department of the Army, U.S. Army Corps of Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(4) | ASTM D93 | 1969 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(26) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.16 | 2003 | Overhead Hoists (Under-hung) | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 404.3 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association |