This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 161.002-4(b)(1) | IEC 533 | 1977 | Electromagnetic Compatibility of Electrical and Electronic Installations in Ships | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-5M | 1985 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.926(d)(1)(i)(B)(2) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(2)(ii) | ASTM D 2471 | 1999 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (8) | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.13) | ATI Publication | 1990 | Validation of Method 1650: Determination of Organic Halide, ERCE Contract 87-3410 | Analytical Technology, Inc | |
Environmental Protection Agency | 40 CFR 80.47(l)(3) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
National Archives and Records Administration | 36 CFR 1234.14(b)(3) | NAPM IT9.25 | 1998 | Imaging Materials--Optical Disc Media--Storage | Association for Information and Image Management | |
Energy Department | 10 CFR 434.402.1.1 | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.077-21(c)(1) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Drawing No. SA-572-S41 | 1994 | Clavicle force transducers | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63.3151(b) | ASTM D 1475 | 2003 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Food and Drug Administration | 21 CFR 177.1520(d)(9) | ASTM D 1601 | 1978 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers | ASTM International | |
Minerals Management Service | 30 CFR 870.18(c) | ASTM D 5192 | 1991 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA-SID-M081 | 1987 | Leg Assembly, Left | Reprographic Technologies | |
Nuclear Regulatory Commission | 10 CFR 52 App. B, III A | DOE Publication | 1997 | Tier 1, Tier 2, and Generic Technical Specifications | General Electric Co. | |
Coast Guard | 46 CFR 111.70-3(a) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 21 CFR 176.170(a)(5) | ASTM D 36 | 1976 | Standard Test Method for Softening Point of Asphalts and Tar Pitches (Ring and Ball Apparatus) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(l)(1) | SAE J-1475 | 1996 | Surface Vehicle Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 89.207(b) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(1) | ASTM A 193/A 193M | 1998 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1(c) | State and Tribal Statutes and Regulations | 2006 | The relevant State or Tribal statutes and regulations that contain standards, requirements, and procedures applicable to owners or operators | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (23) | APHA Method 4500-CN D | 1999 | Cyanide by Titrimetric Method | American Public Health Association | |
Coast Guard | 46 CFR 184.200 | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) G1 | PPI TR-3 | 2004 | Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Pressure Design Basis (PDB), Strength Design Basis (SDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe | Plastics Pipe Institute, Inc. | |
Food and Drug Administration | 21 CFR 172.869(b)(10) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Public Health Service | 42 CFR 84.141(c) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(30) | SAE J-902a | 1967 | Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 304 | 2014 | Radium 226, Radiochemical | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, BP incandescent reflector lamp (2) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(i) | ASME OM Code | 1995 | Code for Operation and Maintenance of Nuclear Power Plants, ISTC 4.2, 1995 Edition with the 1996 and 1997 Addenda, or ISTC-3500, 1998 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM F 819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.1 | ASTM D 2234 | 1996 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 305R | 1989 | Hot Weather Concreting | American Concrete Institute | |
Environmental Protection Agency | 40 CFR 52.741(i)(2) | 35 I.A.C. 215, Subpart Q | 1989 | Sections 215.430, 215.431, 215.433, 215.434, 215.435, and 215.437 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(b)(2) | ASTM E 8 | 1991 | Standard Test Method of Tension Testing of Metallic Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.201-5(a) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-18 | 1975 | Specification for L-811 Static Indoor Type Constant Current Regulator Assembly, 4 KW; With Brightness Control and Runway Selection for Direct Operation (Through change 1, 1975) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4110 B | 1998 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0014 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 33 CFR 155.140(c)(5) | ASTM F 1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
National Highway Traffic Safety Administration | 21 CFR 102.23(c)(9) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 79.61(d)(4)(ii) | HHS Publication | 1985 | Guide for the Care and Use of Laboratory Animals | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 30.01-6(a)(2)(i) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization |