This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.11(u) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(17)(i) | ASTM D975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.704(d)(4) | ASTM D1946 | 1994 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(8) | ASTM B117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.18.7 | 1999 | Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection | American Society of Agricultural Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix A VII (B) | IES LM-45 | 1980 | Electrical and Photometric Measurements of General Service Incandescent Filament Lamps | Illuminating Engineering Society of North America | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toxaphene) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Coast Guard | 21 CFR 177.1520(b) | FDA Publication | 1989 | Mooney Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(2) | RT Publication | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 1051.501(d)(3) | ASTM D471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | AWWA C950 | 2013 | Fiberglass Pressure Pipe | American Water Works Association | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(43) | ASTM D975 | 1978 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(6)(iii) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(xiii) | ANSI/ISEA Z308.1 | 2009 | Minimum Requirements for Workplace First Aid Kits and Supplies | International Safety Equipment Association | |
Coast Guard | 21 CFR 173.375(a) | USP 30/NF 25 | 2007 | United States Pharmacopeia (USP)/National Formulary (NF) pp. 1700-1701 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B26/B 26M | 1997 | Standard Specification for Aluminum-Alloy Sand Castings | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NFPA 58 | 1989 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) D4 | ASME B31.8 | 2004 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.4900(b)(4)(vii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(k)(6)(i) | NH State Regulations | 2003 | New Hampshire Regulations Applicable to Hazardous Air Pollutants | State of New Hampshire | |
Energy Department | 10 CFR 431.86(c)(1)(iii)(A) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1120.3(b)(1) | ASTM F1816-97 | 1997 | Standard Safety Specification for Drawstrings on Children's Upper Outerwear | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181(b) | Drawing No. 175-0000, Sheet 3 of 6 | 2009 | Exterior dimensions of ES-2re test dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(R) | EPA Method 365.3 | 1978 | Phosphorus, All Forms (Colorimetric, Ascorbic Acid, Two Reagent) | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1040(c) Footnote 3 | ASTM D1434 | 1982 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
Interior Department | 43 CFR 11.83(c)(2)(ii) | ILAC Publication | 1973 | Uniform Appraisal Standards for Federal Land Acquisition | Interagency Land Acquisition Conference | |
Federal Communications Commission | 47 CFR 15.122(b) | EIA-708-B | 1999 | Digital Television (DTV) Closed Captioning | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7041 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.903(g)(3)(i) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.565 | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Wage and Hour Division | 29 CFR 570.57(a)(1)(i) | NIST Handbook 69 | 1959 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.077-21(c)(4)(i) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C720 | 1989 | Spray Applied Fibrous Insulation for Elevated Temperature | ASTM International | |
Coast Guard | 46 CFR 56.30-10(b)(5) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.214 S12.1.1(b)(1) | SAE J-826 | 1980 | Devices for Use in Defining Vehicle Seating Accommodations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.344(c)(2) | ASME MFC-4M | 1997 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-4C | 1975 | Installation Details for Runway Centerline and Touchdown Zone Lighting Systems (Through change 1, 1975) | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.50(c) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 020 | 1976 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency |