This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.040-1(a)(2) | MIL-R-45505A | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Consumer Product Safety Commission | 16 CFR 1616.5(a)(9) Footnote 3 | ASTM D 2654 | 1971 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.11(e) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(2)(i) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 17.0(9) | ASTM D 2928 | 1971 | Standard Method for Sampling Stacks for Particulate Matter | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(8) | SAE J-319b | 1971 | Self-Propelled Scrapers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Rural Utilities Service | 7 CFR 1755.890(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(iv) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403(a) | SAE J-231 | 1971 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(h)(1) | IEEE 279 | 1971 | Criteria for Protection Systems for Nuclear Generating Stations | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(16) | RUS Bulletin 50–60 (T–9) | 1971 | RUS Specification for Single Pole Steel Structures Complete with Arms | Rural Utilities Service, U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(6) | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Mine Safety and Health Administration | 30 CFR 75.1107-3(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(114) | ASTM D 2986 | 1971 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(13) | ASTM D 484 | 1971 | Standard Specification for Hydrocarbon Drycleaning Solvents | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.801-1 | IEEE 32 | 1971 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-529B | 1971 | Insulation Board, Thermal (Mineral Aggregate) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 103, 6.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(k) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-237 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods |