This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(j)(2) | ISO/IEC 17021-1 | 2015 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements | International Organization for Standardization |
Federal Communications Commission | 82 FR 50826 | 47 CFR 2.910(c)(3) | ANSI C63.26-2015 | 2015 | American National Standard of Procedures for Compliance Testing of Transmitters Used in Licensed Radio Services | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | CAN/CSA-C22.2 NO. 0-10 (R2015) | 2015 | Update to Electrical Engineering Regulations | Canadian Standards Association |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEC 60079–5:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 272.1351(c)(1) | MTHWMP | 2015 | Montana Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Montana | |
Transportation Department | 85 FR 27810 | 49 CFR 173 | ISO 17871:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 272, Subpart XX | WVHWMP | 2015 | State of West Virginia Hazardous Waste Management Program (Reserved) | State of West Virginia | |
Environmental Protection Agency | 40 CFR 268.7(c)(2) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.814 (d) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEEE C37.27–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.NCA-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 171 | ISO 11623(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Energy Department | 10 CFR 429.134(i)(2)(ii) | NSF/ANSI 50-2015 | 2015 | Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities, Annex C—Test methods for the evaluation of centrifugal pumps | NSF International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEC 60079–6:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 162 | 2015 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 761.60(g)(1)(iii) | ASTM D 4059 | 2015 | Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography | ASTM International | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.CC.BPV-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 180 | UN Manual of Tests and Criteria Rev. 6/Amend. 1 | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Transportation Department | 87 FR 44944 | 49 CFR 171 | UN GHS (Rev.8) (2019) | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE C37.13–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Federal Trade Commission | 84 FR 20777 | 16 CFR 460 | ASTM C 1371–15 | 2015 | Labeling and Advertising of Home Insulation: Trade Regulation Rule | ASTM International |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEC 60533:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | UL 2021 2015 | 2015 | Update to Electrical Engineering Regulations | Underwriters Laboratories, Inc. |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEC 60079–7:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.I-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 173 | ISO 21172–1:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 435.41(e) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | ASTM F2876–10 | 2015 | Update to Electrical Engineering Regulations | ASTM International |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.III.2-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 27810 | 49 CFR 176 | UN Manual of Tests and Criteria Rev. 6/Amend. 1 | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(3) | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.45 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | IEC 60079–7:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 662 | 2015 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 257 | 2015 | Criteria for Classification of Solid Waste Disposal Facilities and Practices | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1064(b)(1) | API MPMS | 2015 | Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks, Chapter 19, Section 3, Part A | American Petroleum Institute | |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.CC.NC-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 98.7(k)(1) | APHA Method 2540 G | 2015 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples | American Public Health Association | |
Environmental Protection Agency | 40 CFR 265.192(a)(3)(ii)(C) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Coast Guard | 46 CFR 193.10-10(m)(4) | UL 19 | 2015 | Fire hose | Underwriters Laboratories, Inc. | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE C37.14–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Energy Department | 86 FR 51230 | 10 CFR 431 | IEEE C57.12.91-2011 | 2015 | Energy Conservation Program: Test Procedure for Distribution Transformers | Institute of Electrical and Electronics Engineers |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.II.A-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Energy Department | 85 FR 1504 | 10 CFR 429 | ISO 1217:2009 | 2015 | Energy Conservation Program: Energy Conservation Standards for Air Compressors | International Organization for Standardization |