This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.165(a) | ASTM D 5598 | 2001 | Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling | ASTM International | |
Coast Guard | 46 CFR 169.703(c)(5)(ii) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 25.01-3(b) | UL 1111 | 1988 | Marine Carburetor Flame Arresters 1988 DHS/USCG | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 21 | ASM Applied and Environmental Microbiology | 1993 | New Medium for the Simultaneous Detection of Total Coliforms and Escherichia coli in Water. Appl. Environ. Microbiol. 59:3534-3544, Brenner et al. | American Society for Microbiology | |
Environmental Protection Agency | 40 CFR 435.44 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(12) | ASTM D 2699 | 2013 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
Coast Guard | 46 CFR 160.010-1(d)(3) | MIL-P-40619A | 1968 | Plastic Material, Cellular Polystyrene | U.S. Department of Defense | |
Energy Department | 10 CFR 430 Subpart B, App. O, 3.1.2 | ANSI Z11.182 | 1965 | Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels | American National Standards Institute | |
Coast Guard | 46 CFR 160.135-7(b)(3)(iv)(B) | ASTM D 4029 | 2009 | Standard Specification for Finished Woven Glass Fabrics | ASTM International | |
Environmental Protection Agency | 40 CFR 1037.810d(d)(1) | SAE J-1252 | 1981 | SAE Wind Tunnel Test Procedure for Trucks and Buses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.650(a)(11) | IDUIC regulations | 1984 | Rules and Regulations: Construction and Use of Injection Wells, Idaho Department of Water Resources, Rules 1 through 14 (August 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(5)(i) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Federal Railroad Administration | 49 CFR 221.5(f) | CIE 1931 | 1931 | 1931 Colormetric System | International Commission on Illumination | |
Environmental Protection Agency | 40 CFR 86.1817-05(c) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 177.1960(b)(1)(ii) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 1319 | 1993 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.44(c) | Drawing No. SA-SID-087 | 1994 | Pelvic Accelerometer, Revision H | Reprographic Technologies | |
Research and Special Programs Administration | 21 CFR 146.120(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 172.105(b)(1) | FDA Publication | 1982 | Ultraviolet Assay | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 92.5(b)(3) | ASTM D 287 | 1992 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | ASTM International | |
Food and Drug Administration | 21 CFR 178.3770(b)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429f | 1971 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(2) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1615.32(a)(1) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.1 | 2000 | Household Cooking Gas Appliances | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 610 | 1985 | Expanded Perlite Block and Pipe Insulation | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 78051-43 | 1987 | Upper leg assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (77) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Total Coliform) | APHA Method 9221 C | 1999 | Estimation of Bacterial Density | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.3 | EMSL-LV0539-17 | 1979 | Radiochemical Analytical Procedures for Analysis of Environmental Samples | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-13(b)(2) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 29 CFR 1915.155(b)(2) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Food and Drug Administration | 21 CFR 177.1050(e)(4) | FDA Publication | 2002 | Gas-Solid Chromatographic Procedure for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food Simulating Solvents. | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 101.505(b) | IMO Conference Resolution 2 | 2002 | ISPS Code | International Maritime Organization | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 174 | 2014 | Carriage by Rail | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 E | 1995 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(113) | ASTM D 2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Rural Utilities Service | 21 CFR 109.30(d) | FDA Publication | 1983 | Test Procedures for Determination of PCB Permeability of Food Packaging, Inner-Wraps | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1945 | 1996 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 110.10-1(l)(2) | NFPA 77 | 2000 | Recommended Practice on Static Electricity | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(i) | AWPA A1 | 2006 | Standard Methods for Analysis of Creosote and Oil-Type Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 60.633(h)(2) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (53) | APHA Method 2540 B | 1997 | Solids, Total Solids Dried at 103-105 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 265.190(a) | EPA Method 9095B | 2004 | Paint Filter Liquids Test | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.9.2(b) | ASTM E 1136 | 2003 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 56.50-57(a)(1)(i) | IMO/IMCO Resolution A.265(VIII) | 1973 | Regulations on Subdivision and Stability of Passenger Ships as Equivalent to part B of chapter II of the International Convention for the Safety of Life at Sea, 1960. | International Maritime Organization, Inter-governmental Maritime Consultative Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association |