This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(47) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design, Twenty-first Edition, December 2000; Errata and Supp 1, December 2002; Errata and Supp 2, September 2005; Errata and Supp 3, October 2007 | American Petroleum Institute | |
Interior Department | 84 FR 21908 | 30 CFR 250 | API Std 53, 4th Edition and Addendum | 2016 | Oil and Gas and Sulfur Operations in the Outer Continental Shelf-Blowout Preventer Systems and Well Control Revisions | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(43) | API MPMS | 1995 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(ii) | API 510 | 2019 | Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration | American Petroleum Institute | |
Coast Guard | 33 CFR 154.106(b)(2) | API RP 550 | 1985 | Manual on Installation of Refinery Instruments and Control Systems | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1961 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(9) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks, Eleventh Edition | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(i) | API MPMS | 2002 | Chapter 4, Section 8 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(28) | API MPMS | 2003 | Chapter 9, Section 2 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B15 | API RP 2350 | 1996 | Overfill Protection for Storage Tanks in Petroleum Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2001 | Chapter 3, Section 1B | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.12005 Maximum True Vapor Pressure (1) | API MPMS | 1997 | Evaporative Loss From Floating-Roof Tanks, First Edition, Chapter 19.2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | API MPMS | 1988 | Chapter 4, Section 3 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(g)(4) | API MPMS | 2013 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(3) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(65) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(8) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B1 | API 5L | 2004 | Specification for Line Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | 2001 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | 2004 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(1)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (c) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.802(e)(3) | API RP 14E | 2000 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.264(b)(1) | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(27) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 6—Pipeline Metering Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(b) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Interior Department | 43 CFR 3174.10(f)(2) | API 21.2 | 1998 | API MPMS Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2, Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(79) | API RP 75 | 2008 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition | American Petroleum Institute | |
Transportation Department | 86 FR 63266 | 49 CFR 191 | API RP 80 | 2000 | Pipeline Safety: Safety of Gas Gathering Pipelines: Extension of Reporting Requirements, Regulation of Large, High-Pressure Lines, and Other Related Amendments | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 75.6(f)(3) | API MPMS | 1992 | Chapter 4, Section 3 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1002(d) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1900 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.803(b)(9)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(48) | API RP 2D | 2007 | Recommended Practice for Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.17(d)(1) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(44) | API MPMS | 2003 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2—Measurement Tickets | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.459 | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(ii) | API MPMS | 2013 | Chapter 5, Section 6 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1628(b)(2) | API RP 14E | 2000 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b)(1) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(29) | API MPMS | 2007 | Chapter 10, Section 1 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B4 | API 510 | 1997 | Pressure Vessel Inspection Code | American Petroleum Institute |