This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-57(f) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(13) | ASTM A 194/A 194M | 1998 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service or Both | ASTM International | |
Coast Guard | 21 CFR 161.145(c)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis 1980 HHS/FDA | AOAC International | |
Coast Guard | 46 CFR 160.156-11(c)(2)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(1) | ASTM A 36/A 36M | 1997 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 33 CFR 183.114(e) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 46 CFR 162.028-3(c)(6) | Federal Standard 151 | 1967 | Metals, Test Methods, Method 811 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 53 | 1998 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Coast Guard | 46 CFR 108.500(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 111.105-15(a) | IEC 60079-5 | 1997 | Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.023-7(b)(2) | Federal Standard 191A | 1978 | Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.176-13(r) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 111.60-1(b) | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IEC 61993-2 | 2001 | Maritime Navigation and Radiocommunication Equipment and Systems, Automatic Identification Systems (AIS) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2) | ASTM D 570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 133.40(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Coast Guard | 46 CFR 175.800(b) | COMDTINST M16714.3 (Series) | 2013 | Equipment Lists, Items Approved, Certificated or Accepted under Marine Inspection and Navigation Laws | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.15-1(c)(2)(i) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 27.102(b) | SAE J-1942 | 1998 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Coast Guard | 46 CFR 54.10-3(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(3) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.022-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 52.01-120(a)(6) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B18.2.1 | 1996 | Square and Hex Bolts and Screws (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.060-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 110.10-1(o)(4) | UL 83 | 1998 | Thermoplastic-Insulated Wires | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 63.25-9(f) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Coast Guard | 46 CFR 199.261(g) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(3)(ii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 34 CFR 75.616(c) | ASHRAE 90A | 1980 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 199.178(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 199.175(b)(28)(i) | ASTM F 1003 | 1992 | Standard Specification for Searchlights on Motor Lifeboats | ASTM International | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 36 CFR 1237.3(f)(2) | NAPM IT9.11 | 1993 | Imaging materials--Processed Safety Photographic Films--Storage Practices | Association for Information and Image Management | |
Coast Guard | 46 CFR 110.10-1(g)(25) | IEC 92-401 | 1980 | Electrical Installations in Ships, Part 401: Installation and Test of completed Installation with amendment 1 (1987) and amendment 2 (1997), Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 122.604(i) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 174.100(e)(3) | ASTM F 1196 | 2000 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 46 CFR 56.25-5 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 147.45(f)(4) | ABYC H-25 | 1981 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 33 CFR 164.72(a)(1)(iii)(B) | RTCM Paper 191-93/SC112-X | 1993 | Recommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards | Radio Technical Commission for Maritime Services | |
Coast Guard | 46 CFR 177.405(b) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.002-4(e) | DWG No. F-49-6-5 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 108.647 | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 12.05-11(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 175.600(b) Table | ABS Publication | 1978 | Rules for Building and Classing Reinforced Plastic Vessels | American Bureau of Shipping |