This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Coast Guard | 40 CFR 444.12(b)(1) Table (2) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO2 B | 1998 | Nitrite (as N), Spectrophotometric: Manual | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(162) | ASTM D 4468 | 1985 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry | ASTM International | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(iii) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(i)(B) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 46 CFR 151.50-73(a), Note | ACGIH Publication | 1987 | Guidelines for the Selection of Chemical Protective Clothing, Third Edition | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 1293 | 1990 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(64) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American National Standards Institute | |
Coast Guard | 46 CFR 118.410(g)(2) | UL 1058 | 1989 | Halogenated Extinquishing System Units as amended through April 19, 1994 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.051-5(b)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Food and Drug Administration | 21 CFR 184.1005(b) | Food Chemicals Codex | 1981 | Acetic Acid | National Academy Press | |
Health and Human Services Department | 45 CFR 162.920(a)(1) | ASC X12N 837 | 2002 | Addenda to Health Care Claim: Dental, version 4010 | Washington Publishing Company | |
Coast Guard | 46 CFR 56.50-97(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (55) | USGS I-3765-85 | 1985 | Solids, residue suspended evaporation 105 degrees C | U.S. Geological Survey | |
Coast Guard | 46 CFR 160.151-29 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.20(a) | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE | APHA Standard Methods, 19th Edition | 1995 | Standard Methods for the Examination of Water and Wastewater, 19th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(2) | EPA-600-4-85-049 | 1985 | Measuring Airborne Asbestos Following an Abatement Action | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.124(e)(1)(ii) | EPA Other Test Method 24 | 2006 | Tracer Gas Protocol for the Determination of Volumetric Flow Rate Through the Ring Pipe of the Xact Multi-Metals Monitoring System, also known as Other Test Method 24 (Tracer Gas Protocol), Eli Lilly and Company Tippecanoe Laboratories | U.S. Environmental Protection Agency | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A6 | 1989 | Method for the Determination of Oil-Type Preservatives and Water in Wood | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 5310 B | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Rural Utilities Service | 7 CFR 1755.890(k)(7)(ii) | ASTM D 4566 | 1990 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 60.46(c)(2) | ASTM D 240 | 1992 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Propanil) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 243.200-1(e)(1) | ANSI Z245.60 | 1996 | Waste Containers—Compatibility Dimensions | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.1282(d)(3)(iv)(C)(1) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Coast Guard | 21 CFR 135.130(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.153(a) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1724.52(a)(2) | EEI Publication | 1996 | Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996 | Edison Electric Institute | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.704 | 2012 | Requirements applicable to both CCSR and NMR aerial service wires | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.160(a)(1)(vi) | LM Publication | 2004 | Hybrid III Weighted Six-Year-Old Child Parts/Drawing List | Leet-Melbrook | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S10.15.7.6 | SAE J-602 | 1980 | Headlamps Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(4)(ii) | ANSI A13.1 | 1956 | Scheme for Identification of Piping Systems | American National Standards Institute | |
National Highway Traffic Safety Administration | 30 CFR 56.13030(d) | NB-23 | 1979 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(ii) | EPA-600-4-79-020 | 1983 | Method 272.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
National Archives and Records Administration | 36 CFR 1237.30(a)(3) | 49 CFR 172.504 | 2014 | Transportation | U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. TE-2208-001 | 1987 | Neck mounting adaptor | Reprographic Technologies | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.2M | 1990 | Vitreous China Plumbing Fixtures | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 46 CFR 161.006-1(a)(3) | ASTM B 456 | 1995 | Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International | |
Federal Highway Administration | 23 CFR 650.313(d) | AASHTO Publication | 2008 | The Manual for Bridge Evaluation | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (112) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(3) | EPA Method 415.3 | 2005 | Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water, Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(93) | ASTM E 711 | 2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 142 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 116.422(b)(2) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency |