This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24640C with Supplement 1 | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | MIL–DTL–24640C with Supplement 1 | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Energy Department | 87 FR 50396 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Ceiling Fans | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1(g)(1) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(4) | DICOM Standard PS 3.11-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 11: Media Storage Application Profiles | National Electrical Manufacturers Association | |
Coast Guard | 45 CFR 162.920(c)(1)(iii) | CAQH Publication | 2011 | Phase I CORE 154: Eligibility and Benefits 270/271 Data Content Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1826 | 2011 | Standard Specification for Live Line and Measuring Telescoping Tools | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(viii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 88 FR 31102 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(2) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | Greenhouse Gas Emissions Model (GEM) version 2.0.1 | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | U.S. Environmental Protection Agency |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (viii) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3262 | 2011 | Standard Specification for, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe | ASTM International | |
Energy Department | 86 FR 56608 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Clothes Dryers | International Electrotechnical Commission |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584b | 2011 | Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 12 | 2011 | Carbon Dioxide Fire Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Health and Human Services Department | 45 CFR 170.202(b) | ONC XDR/XDM for Direct Messaging v1.0 | 2011 | ONC XDR and XDM for Direct Messaging Specification | Office of the National Coordinator for Health Information Technology | |
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Public Health Service | 42 CFR 37.10(f)(5) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
Federal Communications Commission | 47 CFR 80.1101(c)(11)(v) | 47 CFR 80.1063 | 2011 | Special requirements for INMARSAT-E EPIRB stations | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 435.41(ff) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Food Safety and Inspection Service | 45 CFR 162.920(d)(1) | NACHA Publication | 2011 | 2011 NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network, NACHA Operating Rules, Appendix One: ACH File Exchange Specifications (Operating Rule 59) | National Automated Clearing House Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(ix) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(32) | ASTM D 2908 | 2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 4052 | 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute |