This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.193(e)(3)(iii) Note | STI Standard F841 | 2018 | Standard for Dual Wall Underground Steel Storage Tank | Steel Tank Institute | |
Environmental Protection Agency | 40 CFR 63.997(e)(2)(iii)(D)(2) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 841 | 1990 | Installation of Interior Lathing and Furring | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S4.4(a) | UNECE Regulation 17 | 2002 | Uniform Provisions Concerning the Approval of Vehicles with Regard to the Seats, their Anchorages and Any Head Restraints: ECE 17 Rev. 1/Add. 16/Rev. 4 | United Nations Economic Commission for Europe | |
Coast Guard | 46 CFR 116.439(d) | NFPA 13 | 1978 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(i)(3)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section I, Fired Pressure Vessels | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(17) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Coast Guard | 46 CFR 159.001-4 | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(i) | API MPMS | 2002 | Chapter 4, Section 8 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 179.200-7(d) Table Note 2 | ASTM A 262 | 1993 | Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(b)(2) | ACGIH Publication | 1986 | Threshold Limit Values and Biological Exposure Indices for 1986-1987 | American Conference of Governmental Industrial Hygienists | |
Coast Guard | 46 CFR 56.01-2(d)(18) | ASME B16.25 | 2003 | Buttwelding Ends | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 140.7(b) | UL 1123 | 1987 | Marine Buoyant Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 173.375(a) | USP 30/NF 25 | 2007 | United States Pharmacopeia (USP)/National Formulary (NF) pp. 1700-1701 | U.S. Pharmacopeial Convention | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(viii) | AOCS Method Ca 18c-91 | 1992 | Determination of Lead by Direct Graphite Furnace Atomic Absorption Spectrometry | American Oil Chemists Society | |
Federal Railroad Administration | 49 CFR 229.205(a)(1) | AAR S-580 | 2005 | Locomotive Crashworthiness Requirements | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (10) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.707(c)(1)(vi) | EPA-821-R-99-001 | 1999 | Cryptosporidium in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 5, 5(b) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.910(e)(6)(i) | ASTM D 2794 | 1992 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(40) | ASTM D 396 | 1990 | Standard Specification for Fuel Oils | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.205(e)(1) | ANSI A117.1 | 1986 | American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,4-D (as acids, salts, and esters)) | EPA Method 515.3 | 1996 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Extraction, Derivitization, and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.614(e)(2)(ii) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | ISO 6683 | 2014 | Earth-moving machinery -- Seat belts and seat belt anchorages -- Performance requirements and tests | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (2)(E) | Federal Test Method Standard 191, Method 5136 | 1968 | Textile Test Methods | Asphalt Roofing Manufacturers Association | |
Food and Drug Administration | 21 CFR 168.122(d)(2) | AOAC Official Methods | 1984 | Official Methods of Analysis, 4th Supplement | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178, Appendix A, Table 1 Note 2 | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(4) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(71) | ANSI Z87.1 | 1989 | Practice of Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.390(l)(6) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 434.402.4.2.1 | ASHRAE 90.1 | 1989 | Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings with addenda (RS-1) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 67.13(b) | DOC Publication 55DC | 1987 | Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas | U.S. Department of Commerce | |
Energy Department | 10 CFR 430.3(m)(1) | NSF 51 | 2007 | Food Equipment Materials | National Sanitation Foundation | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(5)(iii) | 42 CFR 84 | 2014 | Approval of Respiratory Devices | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 164.008-3(c)(3) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note 1 | APHA Standard Methods, 19th Edition | 1995 | Standard Methods for the Examination of Water and Wastewater. 19th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, B | ISO 10634:1995(E) | 1995 | Water Quality—Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent Evaluation of Their Biodegradability in an Aqueous Medium. First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA-815-B-01-001 | 2001 | Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography with the Addition of a Postcolumn Reagent for Trace Bromate Analysis | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(160) | ASTM D 4457 | 1985 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Coast Guard | 46 CFR 160.060-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (iii) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Tebuthiuron) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.84(d)(1)(i)(B) | NDUSTP | 1995 | North Dakota Regulatory Requirements Applicable to the Underground Storage Tank Program | State of North Dakota | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.1 | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International |