This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 434.701.1 RS-3 | NEMA MG-1 | 1993 | Motors and Generators (RS-3) | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Rural Utilities Service | 7 CFR 1755.860(b)(11)(iv) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(iii) | EPA Method 1106.1 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus-Esculin Iron Agar (mE-EIA) | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.926c Table | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code including the 1993 amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(ii) | ASTM D 792 | 2008 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | ASTM D 2972 | 1997 | Arsenic by Gaseous Hydride Atomic Absorption | ASTM International | |
Coast Guard | 33 CFR 155.140(c)(3) | ASTM F 722 | 1993 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 51.302(c)(4)(iii) | EPA-450-3-80-009b | 1980 | Guidelines for Determining Best Available Retrofit Technology for Coal-Fired Power Plants and Other Existing Stationary Facilities | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.20-15(c) | ISA S75.02 | 1996 | Control Valves | International Society for Measurement and Control | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NOFMA Publication | 1986 | Hardwood Flooring Installation Manual | National Oak Flooring Manufacturers Association | |
Drug Enforcement Administration | 21 CFR 1300.03 FIPS 186-3 | FIPS Publication 186-3 | 2009 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.077-21(c)(4)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(4) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.141(a)(2) Potable water | 40 CFR 141 | 2013 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 10 | AOAC Official Methods | 1995 | Official Methods of Analysis of AOAC International, 16th Edition, Volume I, Chapter 17 | AOAC International | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.4) | NIOSH Publication 77-206 | 1977 | Working with Carcinogens | National Institute for Occupational Safety and Health | |
Environmental Protection Agency | 40 CFR 80.47(m)(6) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 18 | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 98.314(c) | ASTM D 3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 63.3161(g) | EPA-450-3-88-018 | 1988 | Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 58.03-1(g)(5) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) C4 | ASME B31.8 | 2004 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (5) | EPA-600-R-94-111 | 1994 | Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 10 CFR 430 Subpart B, App. J1, 2.6.4.5.1 | AATCC 118 | 1997 | Oil Repellency: Hydrocarbon Resistance Test | American Association of Textile Chemists and Colorists | |
Occupational Safety and Health Administration | 29 CFR 1926.6(k)(1) | ASAE R313.1 | 1975 | Soil Cone Penetrometer | American Society of Agricultural Engineers | |
Veterans Affairs Department | 38 CFR 17.63(a)(4) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(34) | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.107 | 29 CFR 1910.107(b)(5) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Research and Special Programs Administration | 49 CFR 173.417(a)(3)(i) | ANSI N14.1 | 1990 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.2600(a)(4) | GUUIC regulations | 1981 | Guam Environmental Protection Agency, Water Quality Standards, Section I-IV (approved September 25, 1981, effective November 16, 1981). | Guam Territory | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886C | 1998 | Standard Test Methods for Nickel in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(6) | ASTM D 910 | 2007 | Standard Specification for Aviation Gasolines | ASTM International | |
Food and Drug Administration | 21 CFR 131.112(e)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (45) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-U B | 2000 | Uranium-Radiochemical Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.120, Appendix C, 2 | NFPA 472 | 2013 | Standard for Professional Competence of Responders to Hazardous Material Incidents | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 75.333(e)(1)(i) | ASTM E 72 | 1980 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 177.300(e) | ABS Publication | 1995 | Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways | American Bureau of Shipping | |
Minerals Management Service | 30 CFR 250.901(d)(13) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.890(i)(4)(iii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association |