This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.010-4(n) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | Federal Specifications Standards and Test Methods | |
Coast Guard | 36 CFR 1237.18(b) | ISO 18923 | 2000 | Imaging Materials--Polyester-Base Magnetic Tape--Storage Practices | International Organization for Standardization | |
Coast Guard | 40 CFR 60.562–2(d) | ASTM D 86 | 1990 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 197 | 1987 | Standard Specification for Cupola Malleable Iron | ASTM International | |
Coast Guard | 46 CFR 160.048-3(d)(1) | FedSpec CCC-C-426D | 1995 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.057-4(d)(9) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 114.600(b) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 160.049-3(b) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 58.10-5(d)(1) | ABYC P-1 | 1973 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-19(c)(16) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 157.435(a)(1) | OCIMF Publication | 1988 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 53.05-5 | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM A 576 | 1995 | Steel Bars, Carbon, Hot-Wrought, Special Quality | ASTM International | |
Coast Guard | 21 CFR 172.785(b)(4) | FDA Publication | 2004 | Quantitation of Listeriolysin O Levels in LMP-102 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.133-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 182.440 Table 182.440(a)(1) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 111.87-3(a) | UL 1042 | 1994 | Standard for Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.15-1(b), Nonsparking fan | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 40 CFR 60.261(n) Standard ferromanganese | ASTM A 99 | 1987 | Standard Specification for Ferromanganese | ASTM International | |
Coast Guard | 46 CFR 111.33-3(a)(2) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 751 | 1997 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 160.156-7(b)(23) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1267 | 2012 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 111.30-5(a)(1) | IEC 60092-302 | 1997 | Electrical Installation in Ships, Part 302: Low-Voltage Switchgear and Control Gear Assemblies, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 21 CFR 184.1138(b) | Food Chemicals Codex | 1981 | Ammonium Chloride | National Academy Press | |
Coast Guard | 40 CFR 136.3(a) Table IE (5) | EPA Method 903.1 | 1980 | Radium-226 Radon Emanation Technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Coast Guard | 33 CFR 96.220(b) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 160.026-1(a)(1) | MIL-L-7178 | 1961 | Lacquer, Cellulose Nitrate, Glass for Aircraft | U.S. Department of Defense | |
Coast Guard | 46 CFR 97.36-1(a) | ASTM Adjunct F1626 | 1996 | Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01 | ASTM International | |
Coast Guard | 46 CFR 164.013-3(b) | UL 1191 | 1995 | Standards for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 12.05-3(b)(4) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 40 CFR 136.3(a) Table IG (Chlorothalonil) | EPA Method 608.2 | 1993 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.30-30(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(iii) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 33 CFR 101.120(a)(1) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 21 CFR 163.5(b) | AOAC Official Methods | 1990 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 175.600(b) Table | UL 710 | 1993 | Exhaust Hoods For Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.10-10(e) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 38.25-3(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(g)(2) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.14 | 1991 | Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 161.002-4(b)(1) | FM Class No. 3230-3250 | 1976 | Smoke Actuated Detectors for Automatic Fire Alarm Signaling | Factory Mutual Engineering and Research | |
Coast Guard | 46 CFR 63.05-1(f)(3) | ISO 13617 | 2001 | Shipbuilding-Shipboard Incinerators—Requirements, Second Edition (Nov. 15, 2001) (“ISO 13617”), | International Maritime Organization | |
Coast Guard | 46 CFR 164.023-3(b)(2) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods |