This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(9) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.263(k)(2)(i) | NFPA 656 | 1959 | Standard for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(i) | ASTM D 5453 | 2000 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Environmental Protection Agency | 40 CFR 147.650(a)(8) | IDUIC regulations | 1977 | Idaho Trade Secrets Act, Title 48, Chapter 8, Idaho Code, sections 48-801 through 48-807 (Bobbs-Merrill 1977 and Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(4)(ii) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Coast Guard | 46 CFR 54.25-10(b)(1)(i) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1796 | 2009 | Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC | ASTM International | |
Coast Guard | 46 CFR 113.30-25(j)(2) | IEC 60331-21 | 1999 | Tests for Electric Cables Under Fire Conditions—Circuit Integrity—Part 21: Procedures and Requirements—Cables of Rated Voltage up to and Including 0.6/1.0kV, First Edition | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(c) C6 | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 2 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.302(e)(12) | ANSI A10.3 | 1970 | Safety Requirements for Explosive-Actuated Fastening Tools | American National Standards Institute | |
Public Health Service | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
Research and Special Programs Administration | 49 CFR 176.84(b)128 | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Food and Drug Administration | 21 CFR 178.3620(d)(3) V.B.19.b | ASTM E 169 | 1981 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ANSI B31.1 | 1986 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 86-5001-001 | 1996 | Leg Assembly, Complete | General Motors Corporation | |
Rural Utilities Service | 7 CFR 1755.902(b)(3) | ITU-T Recommendation G.655 | 2006 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (68) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1211.2(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 189.110(c) | AOAC Journal | 1973 | Flavors and Nonalcoholic Beverages, Vol. 56, No. 5, pages 1281-1283 | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2013(a)(1) | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 171 | 2014 | Hazardous Materials Regulations, General Information, Regulations, and Definitions | U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.370(a) | ASTM A 475 | 1978 | Standard Specification for Zinc-Coated Steel Wire Strand | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (76) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | AOAC Method 993.14 | 1998 | Arsenic-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Coast Guard | 45 CFR 162.1603(a)(6) | CAQH Publication | 2012 | Phase III CORE 350 Health Care Claim Payment/Advice (835) Infrastructure Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(82) | ASTM D 2015 | 1996 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(i)(B) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.013-1(b)(1) | Drawing No. 160.013-1 | 2012 | Hatchet (Lifeboat and Liferaft) | U.S. Coast Guard | |
Coast Guard | 46 CFR 182.440(a)(2)(i) | ASTM D 2863 | 1995 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) | ASTM International | |
National Highway Traffic Safety Administration | 10 CFR 52 App. C, III D | AP 600 | 1999 | Tier 1, Tier 2, and Generic Technical Specifications | Westinghouse Electric Company | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9095B | 2004 | Paint Filter Liquids Test | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Specific Extinction Area | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 56.50-15(b) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | APHA Method 3500-K B | 1997 | Potassium, Flame Photometric Method | American Public Health Association | |
Food and Drug Administration | 21 CFR 172.215(b)(1) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Energy Department | 10 CFR 430.3(c)(15) | ANSI C82.11 | 2002 | American National Standard for Lamp Ballasts—High-frequency Fluorescent Lamp Ballasts—Supplements | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-27(c)(5) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.750(a)(2)(i) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Coast Guard | 46 CFR 114.600(b) | ASTM B 127 | 1998 | Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 27 | APHA Standard Methods, 14th Edition | 1975 | Standard Methods for the Examination of Water and Wastewater. 14th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 194.5(a)(2) | ASME NQA-1 | 1989 | Quality Assurance Program Requirements for Nuclear Facilities | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.364(e)(6) | ASME MFC-18M | 2001 | Measurement of Fluid Flow Using Variable Area Meters | American Society of Mechanical Engineers | |
Grain Inspection, Packers and Stockyards Administration | 7 CFR 802.0(a) | NIST Handbook 44 | 1990 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-Methyl-4-chlorophenoxyacetic acid) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency |