This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(18) | EPA Method 550 | 1990 | Determination of Polycyclic Aromatic Hydrocarbons in Drinking Water by Liquid-Liquid Extraction and HPLC with Coupled Ultraviolet and Fluorescence Detection | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.076-39(a) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 430.3(c)(3) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute | |
Coast Guard | 46 CFR 174.100(e)(2) | ASTM F 1197 | 2000 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 761.60(g)(1)(iii) | EPA Method 608 | 1984 | Organochlorine Pesticides and PCBs | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.859(b)(11) | FDA Publication | 1996 | Determination of Isobutyl Alcohol | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.50-97(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (55) | USGS I-3765-85 | 1985 | Solids, residue suspended evaporation 105 degrees C | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (12) | USGS I-3135-85 | 1989 | Cadmium, by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | USGS I-4515-91 | 1993 | Total Kjeldahl Nitrogen - Block Digest, Phenate | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 1310 | 1986 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(78) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.2 | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.151-29 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.20(a) | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 141.131(b)(2)(iv) Table | EPA Method 326.0 | 2002 | Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography Incorporating the Addition of a Suppressor Acidified Postcolumn Reagent for Trace Bromate Analysis, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(50) | ASTM D 4084 | 2007 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Food and Drug Administration | 21 CFR 173.310(c) | Food Chemicals Codex | 1996 | Sodium carboxymethylcellulose | National Academy Press | |
Coast Guard | 46 CFR 58.01-50(a) | IMO Publication A.468(XII) | 1981 | Code on Noise Levels on Board Ships | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 141.23(k)(2) Table Note 4 | EPA Method 100.1 | 1993 | Analytical Method For Determination of Asbestos Fibers in Water, EPA-600-4-83-043 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 975 | 2008 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(iii) | ANSI/ASME PTC 19.10-1981 | 1981 | Flue and Exhaust Gas Analyses | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.218(j)(3) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(B)(3)(ix) | ASTM D 2372 | 1985 | Standard Method of Separation of Vehicle from Solvent-Reducible Paints | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 211.2 | 1991 | Standard Practice for Selecting Proportions for Structural Lightweight Concrete | American Concrete Institute | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 2598 | 2012 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-44 | 2001 | Steel Pipe Line Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Research and Special Programs Administration | 49 CFR 195.452(h)(4)(i)(B) | ASME B31G | 1991 | Manual for Determining the Remaining Strength of Corroded Pipelines | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.890(k)(4)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.593a(d) | ASTM D 86 | 1978 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 130.240(a) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. TE-2208-001 | 1987 | Neck mounting adaptor | Reprographic Technologies | |
Public Health Service | 42 CFR 52b.12(c)(6) | NAS Publication | 1995 | Prudent Practices in the Laboratory: Handling and Disposal of Chemicals | National Academy of Sciences, National Research Council | |
Research and Special Programs Administration | 49 CFR 178.337-16(b)(2) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Oceanic and Atmospheric Administration | 21 CFR 155.3(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Rural Utilities Service | 7 CFR 1755.506(z)(2) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.165(a) | Drawing No. 167–3010 | 2009 | Lumbar Weight Base, Revision A | Leet-Melbrook | |
Food and Drug Administration | 21 CFR 184.1278(b) | Food Chemicals Codex | 1981 | Diacetyl | National Academy Press | |
Federal Highway Administration | 23 CFR 650.313(d) | AASHTO Publication | 2008 | The Manual for Bridge Evaluation | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (112) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(vi) | ASTM D 512 | 2004 | Standard Test Methods for Chloride Ion in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(xv) | ISO 10707:1994(E) | 1994 | Water Quality—Evaluation in an Aqueous Medium of The Ultimate Aerobic Biodegradability of Organic Compounds—Method by Analysis of Biochemical Oxygen Demand (Closed Bottle Test). First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 323 | 1990 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Heptachlor) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 268.48(a), Universal Treatment Standards Table Footnote 4 | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 72.13(a)(5) | ASTM D 7036 | 2004 | Standard Practice for Competence of Air Emission Testing Bodies | ASTM International | |
Food and Drug Administration | 21 CFR 173.60(b)(3) | FDA Publication | 1984 | Determination of Epichlorophydrin and 1,3-Dichloro-2-Propanol in Dimethylamine-Epichlorohydrin Copolymer | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 610 | 1985 | Expanded Perlite Block and Pipe Insulation | ASTM International |