This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(24) | API MPMS | 2008 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(9) | ASTM C 150 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.834 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(1) | ACI 318 | 1995 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(2) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ISO 10432:2004 | 2004 | Specification for Subsurface Safety Valve Equipment | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | 1986 | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(2) | ASTM C 94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(48) | API RP 2D | 2007 | Recommended Practice for Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(24) | NACE RP-0176 | 2003 | Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production | National Association of Corrosion Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(m)(1) | ISO/IEC 17011 | 2005 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies, First edition | International Organization for Standardization / International Electrotechnical Commission | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(4) | ANSI/ASME B16.5 | 2003 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14F | 2008 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(28) | API MPMS | 2003 | Chapter 9, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | ANSI/API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iii) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(65) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(8) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(C) | ASTM A 525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.704 | 2012 | Requirements applicable to both CCSR and NMR aerial service wires | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(ii) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Rural Utilities Service | 7 CFR 1728.202(f)(1)(v)(B) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.522(a)(12) | RUS Bulletin 345-87, PE-87 | 1983 | RUS Specification for Terminating (TIP) Cable | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Rural Utilities Service | 7 CFR 1755.703(e)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.870(g)(3)(iv) | ASTM D 2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(j)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.903(a)(11) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.902(b)(2) | ITU-T Recommendation G.657 | 1993 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network | International Telecommunication Union--Telecommunication | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(viii) | ASTM D 1693 | 1988 | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics reapproved 1988 | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(c)(2) | ANSI O5.3 | 2008 | American National Standard for Wood Poles and Wood Products, Solid Sawn-Wood Crossarms & Braces—Specifications & Dimensions | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1728.201(h)(2)(iii) | AWPA P9 | 2006 | Standard for Solvents and Formulations for Organic Preservative Systems | American Wood Protection Association | |
Rural Utilities Service | 7 CFR 1755.370(b) | ASTM A 475 | 1978 | Standard Specification for Zinc-Coated Steel Wire Strand | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(l)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.703(g)(9)(ii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.522(o)(3)(i) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Rural Utilities Service | 7 CFR 1755.860(m)(1)(ii) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(h)(8)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.903(j)(8) | ASTM B 736 | 2000 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock | ASTM International |