Coast Guard |
|
46 CFR 111.53-1(a)(1) |
IEC 92-202 |
1996 |
Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 111.50-3(e) |
IEC 92-202 |
1996 |
Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 111.54-1(a)(1) |
IEC 92-202 |
1996 |
Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 110.10-1(g)(17) |
IEC 92-202 |
1996 |
Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 111.33-5(b) |
IEC 92-304 |
1995 |
Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 111.33-3(a)(2) |
IEC 92-304 |
1995 |
Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 110.10-1(g)(21) |
IEC 92-304 |
1995 |
Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors
|
International Electrotechnical Commission |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
IEEE 1584a |
2004 |
Amendment 1 to IEEE Std 1584-2002 Guide for Performing Arc-Flash Hazard Calculations
|
Institute of Electrical and Electronics Engineers |
Coast Guard |
|
46 CFR 111.12-7(b) |
IEC 92-301 |
1995 |
Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors
|
International Electrotechnical Commission |
Research and Special Programs Administration |
|
46 CFR 111.70-1(a) |
IEC 92-301 |
1995 |
Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 111.25-5(a) |
IEC 92-301 |
1995 |
Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 110.10-1(g)(18) |
IEC 92-301 |
1995 |
Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors
|
International Electrotechnical Commission |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
IEEE 1584b |
2011 |
Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations
|
Institute of Electrical and Electronics Engineers |
Transportation Department |
87 FR 57379 |
14 CFR 71 |
FAA Order JO 7400.11G : jet route J-52 |
2022 |
Amendment and Revocation of Air Traffic Service (ATS) Routes; Eastern United States
|
Federal Aviation Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 147.2201(a)(3)(ii) |
TXUIC regulations |
1981 |
Amendment to 16 TAC section 3.46 (section .051.02.02.046) issued December 21, 1981, effective April 1, 1982
|
State of Texas |
Environmental Protection Agency |
|
40 CFR 147.2201(a)(3)(iii) |
TXUIC regulations |
1981 |
Amendment to 16 TAC section 3.71 (section .051.02.02.074) issued December 21, 1981, effective April 1, 1982
|
State of Texas |
Environmental Protection Agency |
|
40 CFR 147.2201(a)(3)(i) |
TXUIC regulations |
1981 |
Amendment to 16 TAC section 3.9 (section .051.02.02.009) issued December 21, 1981, effective April 1, 1982
|
State of Texas |
Coast Guard |
|
46 CFR 172.020(b)(1) |
IMO Resolution A.264(VIII) |
1960 |
Amendment to Chapter VI of the International Convention for the Safety of Life at Sea
|
International Maritime Organization |
Coast Guard |
|
46 CFR 172.015(a)(2) |
IMO Resolution A.264(VIII) |
1960 |
Amendment to Chapter VI of the International Convention for the Safety of Life at Sea
|
International Maritime Organization |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
IEEE 4a |
2001 |
Amendment to IEEE Standard Techniques for High-Voltage Testing
|
Institute of Electrical and Electronics Engineers |
Consumer Product Safety Commission |
87 FR 42633 |
16 CFR 1231 |
ASTM F404-21 |
2022 |
Amendment to Incorporation by Reference in Safety Standard for High Chairs
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(vi) |
LAUIC regulations |
1984 |
Amendment to Statewide Order No. 29-B (Amendment concerning disposal of nonhazardous oilfield waste) (March 20, 1984, effective May 20, 1984)
|
State of Louisiana |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(vii) |
LAUIC regulations |
1985 |
Amendment to Statewide Order No. 29-B (Amendment concerning the administrative approval of injectivity tests and pilot projects in order to determine the feasibility of proposed enhanced recovery projects) (June 20, 1985, effective July 1, 1985)
|
State of Louisiana |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(v) |
LAUIC regulations |
1983 |
Amendment to Statewide Order No. 29-B (Amendment concerning the offsite disposal of drilling mud and saltwater) (effective May 20, 1983)
|
State of Louisiana |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(iv) |
LAUIC regulations |
1982 |
Amendment to Statewide Order No. 29-B (Amendment concerning the underground injection control of saltwater disposal wells, enhanced recovery injection wells, and liquid hydrocarbon storage wells) (effective February 20, 1982)
|
State of Louisiana |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(iii) |
LAUIC regulations |
1981 |
Amendment to Statewide Order No. 29-B (Amendment concerning the use of Tables 5A and 6A, etc.) (December 15, 1980, effective January 1, 1981)
|
State of Louisiana |
Coast Guard |
|
46 CFR 162.161-6(a) |
IMO MSC.1/Circ. 1267 |
2008 |
Amendments to Revised Guidelines for the Approval of Equivalent Fixed Gas Fire-Extinguishing Systems, as Referred to in SOLAS 74, for Machinery Spaces and Cargo Pump-Rooms (MSC/Circ. 848)
|
International Maritime Organization |
Coast Guard |
|
46 CFR 162.161-2(b)(2) |
IMO MSC.1/Circ. 1267 |
2008 |
Amendments to Revised Guidelines for the Approval of Equivalent Fixed Gas Fire-Extinguishing Systems, as Referred to in SOLAS 74, for Machinery Spaces and Cargo Pump-Rooms (MSC/Circ. 848)
|
International Maritime Organization |
Federal Communications Commission |
89 FR 58072 |
47 CFR 25 |
ITU AP30/30A |
2024 |
Amendments to Rules for Direct Broadcast Satellite, Satellite Services, and 17 GHz; Updates to Forms 312 and 312-R for the International Communications Filing System; Corrections to 17 GHz Report and Order
|
International Telecommunication Union Radiocommunication Bureau |
Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(ii) |
LAUIC regulations |
1980 |
Amendments to Statewide Order No. 29-B (Off-site Disposal of Drilling Mud and Salt Water Generated from Drilling and Production of Oil and Gas Wells) (effective July 20, 1980)
|
State of Louisiana |
Coast Guard |
|
46 CFR 172.070 |
IMO Resolution MEPC.117(52) |
2004 |
Amendments to the Annex of the Protocol of 1978 Relating to the International Convention for the Prevention of Pollution from Ships
|
International Maritime Organization |
Coast Guard |
|
46 CFR 172.020(b)(3) |
IMO Resolution MEPC.117(52) |
2004 |
Amendments to the Annex of the Protocol of 1978 Relating to the International Convention for the Prevention of Pollution from Ships
|
International Maritime Organization |
Coast Guard |
|
46 CFR 171.012(b)(1) |
IMO Resolution MSC.216(82) |
2006 |
Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended (IMO Res. MSC.216(82)
|
International Maritime Organization |
Coast Guard |
|
46 CFR 171.080(g) |
IMO Resolution MSC.216(82) |
2006 |
Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended (IMO Res. MSC.216(82)
|
International Maritime Organization |
Housing and Urban Development Department |
|
24 CFR 3280.803(f) |
ANSI/NEMA WD-6 |
1977 |
American National Standard Dimensions of Caps, Plugs, and Receptacles, Grounding Type--Wiring Devices-Dimensional Specifications
|
American National Standards Institute |
Coast Guard |
|
46 CFR 110.10-1(c)(1) |
ANSI/IEEE C37.12 |
1991 |
American National Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Specifications Guide
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 100.205(e)(1) |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 100.201a(b)(4) |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 100.201 Accessible |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 100.201 Accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
Energy Department |
|
10 CFR 430.2, Definitions, Cold temperature flouresent lamp |
ANSI/IEC C78.81 |
2005 |
American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics
|
American National Standards Institute |
Energy Department |
|
10 CFR 430.3(c)(6) |
ANSI C78.81 |
2010 |
American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics
|
American National Standards Institute |
Energy Department |
|
10 CFR 430.2, Definitions, Cold temperature flouresent lamp |
ANSI/IEC C78.901 |
2005 |
American National Standard for Electric Lamps—Single-Based Fluorescent Lamps—Dimensional and Electrical Characteristics
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60.5535(d)(1) |
ANSI C12.20 |
2010 |
American National Standard for Electricity Meters—0.2 and 0.5 Accuracy Classes
|
American Society of Mechanical Engineers |
Energy Department |
|
10 CFR 430.32(n)(2)(ii) |
ANSI C78.3 |
1991 |
American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics
|
American National Standards Institute |
Energy Department |
|
10 CFR 430.3(c)(1) |
ANSI C78.3 |
1991 |
American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics
|
American National Standards Institute |
Energy Department |
|
10 CFR 430.3(c)(7) |
ANSI C78.375 |
1997 |
American National Standard for Fluorescent Lamps—Guide for Electrical Measurements
|
American National Standards Institute |
Consumer Product Safety Commission |
|
16 CFR 1420.3(a) |
ANSI/SVIA 1 |
2010 |
American National Standard for Four-Wheel All-Terrain Vehicles
|
Specialty Vehicle Institue of America |
Energy Department |
|
10 CFR 430.3(c)(16) |
ANSI C82.13 |
2002 |
American National Standard for Lamp Ballasts—Definitions for Fluorescent Lamps and Ballasts,
|
American National Standards Institute |