This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1755.910(e)(6)(v) | ASTM A 526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Rural Utilities Service | 7 CFR 1755.902(r)(15)(iv)(F) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Rural Utilities Service | 7 CFR 1755.390(a)(7) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(p)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.704(e) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.504(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.702(a)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.860(m)(7)(ii) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.890(a)(6) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.890(l)(5) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.903(l)(4) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 2565 | 1992 | Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(15) | RUS Bulletin 1753F-151, Form 515b | 2001 | Specifications and Drawings for Construction of Underground Plant | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.902(l)(4)(iv) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.292 (j) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(64) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(4)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(75) | API 2552 | 2007 | Measurement and Calibration of Sphere and Spheroids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(6) | API Bulletin 92L | 2015 | Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(70) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ANSI/API Spec. 14A | 2006 | Specifications for Subsurface Safety Valve Equipment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(i) | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(85) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method, First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(4) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(22) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(86) | ANSI/API Spec. 11D1 | 2009 | Packers and Bridge Plugs | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(3) | ANSI/ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels; Divisions 1 and 2, 2004 Edition; July 1, 2005 Addenda, Divisions 1 and 2, and all Section VIII Interpretations Volumes 54 and 55 | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(1) | AWS D1.1 | 2000 | Structural Welding Code--Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | ANSI/API Spec. 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(2)(iii)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(9) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(38) | API MPMS | 2002 | Chapter 10—Sediment and Water, Section 9—Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(f)(5) | 2017 ASME Boiler and Pressure Vessel Code | 2017 | Section VIII, Rules for Construction of Pressure Vessels; Division 3: Alternative Rules for Construction of High Pressure Vessels | American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b)(3) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(19) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.850 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(54) | API MPMS | 1993 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 1—Electronic Gas Measurement | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(55) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(2) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(76) | API 2555 | 2002 | Method for Liquid Calibration of Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(2) | ACI 318R | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |