DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(41) | API MPMS | 2009 | Chapter 14, Section 3, Part 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(3) | ANSI/AISC 360 | 2005 | Specification for Structural Steel Buildings | American Institute of Steel Construction | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14F | 2008 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(51) | API RP 2RD | 2009 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs), First Edition, June 1998; reaffirmed, May 2006, Errata, June 2009 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(5) | API MPMS | 1994 | Chapter 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | ANSI/API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iii) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(57) | API RP 14E | 2007 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(f) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(33) | API MPMS | 2005 | Chapter 10, Section 9 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(24) | API MPMS | 2008 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.834 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ISO 10432:2004 | 2004 | Specification for Subsurface Safety Valve Equipment | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.108(c) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(15) | API MPMS | 2003 | Chapter 4, Section 7 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | 1986 | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(41) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products and Lubricating Oils | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(3) | ASTM C 150-07 | 2007 | Standard Specification for Portland Cement | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.850 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1902(c) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(n)(1) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(42) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(5) | ASTM C 595 | 2008 | Blended Hydraulic Cements | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(3) | ACI 357R-84 | 1984 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(57) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(3) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(6) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(6) | API MPMS | 2007 | Chapter 2, Section 2A | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(9) | API MPMS | 1989 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(73) | API RP 17H | 2013 | Remotely Operated Tools and Interfaces on Subsea Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iv) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(59) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1997 | Chapter 11.1, Volume 1, Table 5A, Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 ° | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(25) | API MPMS | 2015 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(89) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.836 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ISO 13628-2:2006 | 2006 | Petroleum and natural gas industries—Design and operation of subsea production systems—Part 2: Unbonded flexible pipe systems for subsea and marine application | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.108(d) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(20) | API MPMS | 2005 | Chapter 5, Section 5 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(42) | API MPMS | 1994 | Chapter 11—Physical Properties Data, Addendum to Section 2, Part 2—Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids | American Petroleum Institute |