Research and Special Programs Administration |
|
10 CFR 430.2, Definitions, Rated wattage (1)(ii) |
ANSI C78.81 |
2005 |
Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics
|
American National Standards Institute |
Research and Special Programs Administration |
|
49 CFR 195.118(a) |
ASME B16.9 |
2004 |
Factory Made Wrought Steel Buttwelding Fittings
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
AAR Publication |
1988 |
AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment
|
Association of American Railroads |
Research and Special Programs Administration |
|
49 CFR 172.401(c)(4) |
TDG Regulations |
2005 |
Transportation of Dangerous Goods Regulations
|
Canadian Department of Transportation, Transport Canada |
Research and Special Programs Administration |
|
49 CFR 173.32(b)(4) |
TDG Regulations |
2005 |
Transportation of Dangerous Goods Regulations
|
Canadian Department of Transportation, Transport Canada |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (25) |
APHA Method 4500-F D |
1997 |
Fluoride by SPADNS Method
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 178.46(h)(2) |
ASTM E290 |
1992 |
Standard Test Method for Semi-Guided Bend Test for Ductility of Metallic Materials
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 180.407(g)(3) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section V
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 179.102-4(a)(2)(i) |
ASTM A20/A 20M |
1993 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192.147(c) |
ASME B16.1 |
1998 |
Cast Iron Flanges and Flanged Fittings, Classes 25, 125, 250 and 800
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
42 CFR 418.110(d)(1)(i) |
NFPA 101 |
2000 |
Life Safety Code
|
National Fire Protection Association |
Research and Special Programs Administration |
|
49 CFR 195.264(b)(1) |
API 620 |
2002 |
Design and Construction of Large Welded Low Pressure Storage Tanks
|
American Petroleum Institute |
Research and Special Programs Administration |
|
46 CFR 108.101(b) |
ASTM F1014 |
1992 |
Standard Specification for Flashlights on Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
TTMA RP No. 61 |
1998 |
Performance of Manhole and/or Fill Opening Assemblies
|
Truck Trailer Manufacturers Association |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (25) |
APHA Method 4500-F E |
1998 |
Fluoride by Complexone Method
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 173.416(b) |
IAEA TS-R-1 |
1996 |
Regulations for the Safe Transport of Radioactive Material
|
International Atomic Energy Agency |
Research and Special Programs Administration |
|
49 CFR 178.337-2(b)(2)(i) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 178.57(d)(5) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(12) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Institutional (837)
|
Washington Publishing Company |
Research and Special Programs Administration |
|
49 CFR 179.20 |
AAR Specification M-1002 |
2000 |
AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars
|
Association of American Railroads |
Research and Special Programs Administration |
|
49 CFR 192.279 |
ASME B16.5 |
2004 |
Steel Pipe Flanges and Pipe Fittings
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(10) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Dental (837)
|
Washington Publishing Company |
Research and Special Programs Administration |
|
49 CFR 192.933(a)(1) |
ASME B31G |
2004 |
Manual for Determining the Remaining Strength of Corroded Pipelines
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
46 CFR 111.30-19(a)(1) |
IEEE 45 |
1998 |
Recommended Practice for Electrical Installations on Shipboard
|
Institute of Electrical and Electronics Engineers |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 173.124(a)(3)(ii) |
UN Publication |
2003 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
|
United Nations |
Research and Special Programs Administration |
|
49 CFR 173.469(a)(4)(ii) |
ISO 9978 |
1992 |
Sealed Radioactive Sources--Leak Test Methods
|
International Organization for Standardization |
Research and Special Programs Administration |
|
49 CFR 178.345-1(f) |
ASME B&PV Code |
1992 |
Boiler and Pressure Vessel Code, Section VIII, Division 1
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 178.68(l)(2) |
CGA C-3 |
1994 |
Standard for Welding and Brazing on Thinned Walled Containers
|
Compressed Gas Association |
Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C13 |
ASTM F1055 |
1998 |
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 179.201-5(b) |
ASTM A240/A 240M |
1999 |
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192.65(a) |
API RP 5L1 |
2002 |
Recommended Practice for Railroad Transportation of Line Pipe
|
American Petroleum Institute |
Research and Special Programs Administration |
|
49 CFR 193.2801 |
NFPA 59A |
2001 |
Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
|
National Fire Protection Association |
Research and Special Programs Administration |
|
49 CFR 195.3(c) B15 |
API RP 2350 |
1996 |
Overfill Protection for Storage Tanks in Petroleum Facilities
|
American Petroleum Institute |
Research and Special Programs Administration |
|
49 CFR 130.5, Liquid |
ASTM D4359 |
1990 |
Standard Test Method for Determining Whether a Material is a Liquid or a Solid
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
UN Publication |
2003 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
|
United Nations |
Research and Special Programs Administration |
|
49 CFR 173.315(k) |
ASME B&PV Code |
1986 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 176.11(f) |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
Research and Special Programs Administration |
|
49 CFR 178.358-1(a)(2) |
DOE KSS-471 |
1986 |
Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1 Fire and Shock Resistant Phenolic Foam-Insulated Metal Overpack
|
U.S. Department of Energy |
Research and Special Programs Administration |
|
49 CFR 179.100-7(a) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192, Appendix B, I |
ASTM A381 |
2001 |
Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems
|
ASTM International |
Research and Special Programs Administration |
|
45 CFR 162.1203(a)(2) |
CAQH Publication |
2011 |
Phase I CORE 153: Eligibility and Benefits Connectivity Rule, version 1.1.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Research and Special Programs Administration |
|
21 CFR 177.1520(b) |
FDA Publication |
1993 |
Determination of Total Acrylic in PP-MMA/BA Polymers
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (11) |
EPA Method 300.0 |
1993 |
Ion chromatography - anions, Revision 2.1
|
U.S. Environmental Protection Agency |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
AA Publication |
1982 |
Aluminum Standards and Data, Seventh Edition
|
Aluminum Association |
Research and Special Programs Administration |
|
49 CFR 172.401(c)(1) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
|
United Nations |
Research and Special Programs Administration |
|
18 CFR 33.32(a)(3) |
ALI Publication |
1992 |
Restatement of the Law (Third) Trusts Section 227
|
American Law Institute |
Research and Special Programs Administration |
|
49 CFR 178.255-1(b) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 178.46(i)(3)(i) |
ASTM B557 |
1984 |
Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 180.413(b)(6) |
CGA TB-2 |
1980 |
Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks
|
Compressed Gas Association |