DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-25 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.708(c)(2) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.315(m)(2) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(1) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178, Appendix A, Table 1 Note 2 | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-16(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.207(d)(2) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.249(d) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.323(b)(3) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(e) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(1) 144 | API 1604 | 1996 | Closures of Underground Petroleum Storage Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-2.2 | 1985 | Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-19(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(l)(1)(ii) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.45(h) | ASTM E 213 | 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(3) | ASTM B 117 | 1979 | Standard Method of Salt Spray (Fog) Testing | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | FedSpec RR-C-901D | 2003 | Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications | Federal Specifications Standards and Test Methods | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 174.63(c)(4) | AAR Specification M-952 | 1988 | Intermodal Container Support and Securement Systems for Freight Cars | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.411(b)(4)(ii) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(1)(iii) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.84(b) 144 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.31(a)(8) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.127(a)(1) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(b)(1) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.911(m) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(r)(2) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-2(b)(1)(i) | ASTM A 300 | 1958 | Standard Specification for Steel Plates for Pressure Vessels for Service at Low-Temperature | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(b) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(b)(72) | EPA-821-R-06-014 | 2006 | Method 1682: Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102(c)(1) 137 | ISO 8115 | 1986 | Cotton Bale--Dimensions and Density | International Organization for Standardization / International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(c)(1)(i) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.307(a)(4)(iv) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 114 | 1995 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10462 | 2005 | Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.46(b)(4) Table 1, Note 2 | ASTM B 221 | 1976 | Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-15 | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(e) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 2 | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.55(d)(3) | CGA C-3 | 1994 | Standard for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(4) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(c) B17 | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.56(b)(2)(i) | NAVSEAINST 8020.8B | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization |