This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(a) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.54-1(c)(1)(iii) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.120-5(d)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IMO Resolution MSC.74 (69), Annex 3 | 1998 | Recommendation on Performance Standards for an Universal Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Coast Guard | 27 CFR 21.65(b)(1) 243 | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(I)(4)(ii) | EPA-600-R-95-131 | 1995 | Method 524.2--Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(ii) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9221 B | 2006 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 46 CFR 151.04-7(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(f)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 1065.1010(e)(3) | ISO 3104 | 1997 | Petroleum products--Transparent and opaque liquids--Determination of kinematic viscosity and calculation of dynamic viscosity | International Organization for Standardization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F) | EPA-600-4-90-020 | 1990 | Methods for the Determination of Organic Compounds in Drinking Water, Supplement 1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.037-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 182.440(a)(2)(v) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-5(c)(3) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Coast Guard | 46 CFR 59.01-2(b)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 63.05-1(d)(1) | ASTM F 1323 | 2001 | Standard Specification for Shipboard Incinerators | ASTM International | |
Coast Guard | 46 CFR 52.05-30(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 13 | ASTM B 171 | 1997 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers | ASTM International | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 34 CFR 668.148(a)(1)(iv) | AERA Publication | 1999 | Testing Individuals of Diverse Linguistic Backgrounds, section of the Standards for Educational and Psychological Testing | American Educational Research Association | |
Coast Guard | 46 CFR 98.25-97(a)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 156.111(b) | ICS Publication | 1989 | Guide to Helicopter/Ship Operations | International Chamber of Shipping | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1998 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 33 CFR 127.1503 | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(a) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 33 CFR 127.107(c) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 33 CFR 120.220(b) | MSC Circular 443 | 1986 | Measures to Prevent Unlawful Acts Against Passengers and Crews Aboard Ships | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079 | 2012 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | IMO SOLAS | 1992 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 126 | 1995 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 24 CFR 3280.604(b)(2) | ASTM B 43 | 1991 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes | ASTM International | |
Coast Guard | 46 CFR 118.410(g)(1) | UL 1058 | 1989 | Halogenated Extinguishing System Units as amended through April 19, 1994 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.450(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 160.174-3(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.151-5(c)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Coast Guard | 46 CFR 56.01-2(e)(23) | ASTM A 307 | 1997 | Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength | ASTM International | |
Coast Guard | 46 CFR 25.45-2(b)(5) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 33 CFR 154.735(s) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 160.005-4(e) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.062-1(a)(1) | MIL-R-15041C | 1954 | Releases, Lifesaving Equipment, Hydraulic and Manual | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 522/A 522M | 1995 | Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | ASTM International | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Coast Guard | 46 CFR 160.055-3(h)(1) | MIL-W-17337D | 1989 | Webbing, Woven, Nylon | U.S. Department of Defense | |
Coast Guard | 30 CFR 250.901(d)(3) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Coast Guard | 46 CFR 160.077-19(b)(2) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. |