This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 18 | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 213.1 | 1971 | Cadmium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Food and Drug Administration | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1728.97(a)(16) | RUS Bulletin 50–60 (T–9) | 1971 | RUS Specification for Single Pole Steel Structures Complete with Arms | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ANSI B114.1 | 1971 | Emblem for Identifying Slow Moving Vehicles | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 60.17(g)(114) | ASTM D 2986 | 1971 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Federal Trade Commission | 16 CFR 460.5(e)(2)(i) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(2)(i) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(3)(ii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(ii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(a)(5)(i) | SAE J-168 | 1970 | Protective Enclosures--Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(15) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(2) | NFPA 32 | 1970 | Standard for Dry Cleaning Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(i) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(k) | SAE J-333a | 1970 | Operator Protection for Wheel-type Agricultural and Industrial Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.122a S4 Skid number | ASTM E 274 | 1970 | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(22)(i) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 264.314(d)(2)(i) | ASTM G 21 | 1970 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(3)(iii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(a)(5)(i) | SAE J-168 | 1970 | Protective Enclosures--Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(iii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(19) | ASTM D 1193 | 1970 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.204(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(3) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(19) | NFPA 80 | 1970 | Standard for the Installation of Fire Doors and Windows | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.13.2 | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(5) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Coast Guard | 46 CFR 169.703(a) | ABYC A-3 | 1970 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE J-167 | 1970 | Protective frame with overhead protection—test procedures and performance requirements | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1201.2(c) | Publication | 1970 | Test Methods and Recommended Practices | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(k)(21) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.214(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International |