This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.040-2(c) | MIL-R-45505 | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Mine Safety and Health Administration | 30 CFR 75.1107-3(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(k) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Federal Railroad Administration | 49 CFR 229.51(a)(1) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-237 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(6) | SAE J-236 | 1971 | Self-Propelled Graders | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.040-1(a)(2) | MIL-R-45505A | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighters | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (38) | EPA Method 352.1 | 1971 | Nitrate Nitrogen - Brucine | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.023-2(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.7.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(7) | SAE J-237 | 1971 | Front End Loaders and Dozers | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1616.5(a)(9) Footnote 3 | ASTM D 2654 | 1971 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 13A | 1971 | Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(h)(1) | IEEE 279 | 1971 | Criteria for Protection Systems for Nuclear Generating Stations | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-166 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(38) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.1 | 1971 | Zinc (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(50) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.1810(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers |