This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vi) | Drawing No. 420-5000-1 | 2011 | Complete Leg Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vii) | Drawing No. 420-5000-2 | 2011 | Complete Leg Assembly—right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.900(b)(15) | RUS IP 344-2 | 2011 | List of Materials Acceptable for Use on Telecommunications Systems of RUS Borrowers | Rural Utilities Service, U.S. Department of Agriculture | |
Health and Human Services Department | 45 CFR 162.920(c)(3)(ii) | CQH Publication | 2011 | Phase II CORE 258: Eligibility and Benefits 270/271 Normalizing Patient Last Name Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 85 FR 56475 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Federal Communications Commission | 47 CFR 80.1101(c)(5)(iv) | 47 CFR 80.1061 | 2011 | Special requirements for 406.0-406.1 MHz EPIRB stations | Federal Communications Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (vii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly, left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 18261 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Microwave Ovens | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 55.14(e)(22)(i)(A) | 40 CFR part 52, subpart VV | 2011 | Outer Continental Shelf Air Regulations Consistency Update for Virginia | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 183.607(a)(3) | UL 1128 | 2011 | Marine Blowers | Underwriters Laboratories, Inc. | |
Energy Department | 87 FR 63588 | 10 CFR 429 | IEEE 114–2010 | 2011 | Energy Conservation Program: Test Procedure for Electric Motors | Institute of Electrical and Electronics Engineers |
Occupational Safety and Health Administration | 29 CFR 1910.137(b) Note to paragraph (b) | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(28) | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Environmental Protection Agency | 40 CFR 63.7575 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(3) | DICOM Standard PS 3.10-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 10: Media Storage and File Format for Media Interchange | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(u) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 3683 | 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1211.40 (b)(1) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Health and Human Services Department | 45 CFR 162.1203(a)(10) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Federal Motor Carrier Safety Administration | 49 CFR 384.107(b) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual,” Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(viii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Transportation Department | 88 FR 84514 | 49 CFR 571 | ASTM D3574–11 | 2011 | Federal Motor Vehicle Safety Standards: Child Restraint Systems | ASTM International |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(2) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Federal Communications Commission | 88 FR 30654 | 47 CFR 74 | ATSC A/53 Part 2 | 2011 | Establishing Rules for Digital Low Power Television and Television Translator Stations | Advanced Television Systems Committee |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.5580 | ASTM D6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Energy Department | 87 FR 51200 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for External Power Supplies | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1042 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
Energy Department | 85 FR 50757 | 10 CFR 430 | IEC 62301 Ed. 1.0 b:2005 | 2011 | Energy Conservation Program: Test Procedures for Cooking Products | International Electrotechnical Commission |
Federal Trade Commission | 92 FR 20788 | 16 CFR 460.5 (e)(2)(viii) | ASTM C 1363-11 | 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus | ASTM International |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International |