This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.3.2 | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 1060.810(d) Table 4 | ABYC H-25 | 2010 | Portable Marine Gasoline Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.135-13(d)(4)(iv) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(k)(4) | NHTSA Parts List and Drawings | 2010 | Ejection Mitigation Headform Drawing Package | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1090 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 98.98 Properly measured destruction or removal efficiency | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5500 | 2011 | Foot molded assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(A) | DICOM Standard PS 3.3-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions | National Electrical Manufacturers Association | |
Federal Communications Commission | 88 FR 30654 | 47 CFR 74 | ATSC A/53 Part 2 | 2011 | Establishing Rules for Digital Low Power Television and Television Translator Stations | Advanced Television Systems Committee |
Research and Special Programs Administration | 45 CFR 162.1203(a)(3) | CAQH Publication | 2011 | Phase I CORE 154: Eligibility and Benefits 270/271 Data Content Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 86.1867-12(a) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.1403(a)(1) | CAQH Publication | 2011 | Phase II CORE 250: Claim Status Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 85 FR 17244 | 40 CFR 60 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills Residual Risk and Technology Review | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.171(a)(3) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Drawing No. 420-3800 | 2011 | Shoulder assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.13 Note 11(b) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(x) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C78.21–2011 (R2016) | 2011 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 60 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
National Highway Traffic Safety Administration | 49 CFr 572.173(b) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (chromium) | EPA Method 218.7 | 2011 | Determination of Hexavalent Chromium in Drinking Water by Ion Chromatography with Post-Column Derivatization and UV-Visible Spectroscopic Detection | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(a) | AASHTO Interstate Standards | 2011 | A Policy on Geometric Design of Highways and Streets | American Association of State Highway and Transportation Officials | |
National Highway Traffic Safety Administration | 49 CFR 572.174(b) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.111-94(b)(3)(vii) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Transportation Department | 88 FR 84514 | 49 CFR 571 | ASTM D3574–11 | 2011 | Federal Motor Vehicle Safety Standards: Child Restraint Systems | ASTM International |
Federal Communications Commission | 86 FR 23614 | 47 CFR 20 | ANSI C63.19–2011 | 2011 | Standards for Hearing Aid-Compatible Handsets | American National Standards Institute |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 80 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
National Telecommunications and Information Administration | 47 CFR 300.1(c) | NTIA Publication | 2011 | NTIA Manual of Regulations and Procedures for Federal Radio Frequency Management | National Telecommunications and Information Administration, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(i) | Drawing No. 420-0000 | 2011 | Complete Assembly HIII 10-year-old | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(B) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
Health and Human Services Department | 45 CFR 162.920(c)(1)(i) | CAQH Publication | 2011 | Phase I CORE 152: Eligibility and Benefit Real Time Companion Guide Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 435.15 Note 7 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.200(c)(1) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | HCC Method 10360 | 2011 | Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2 | Hach Chemical Company | |
Energy Department | 87 FR 33316 | 10 CFR 431 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
Health and Human Services Department | 45 CFR 162.1403(a)(1) | CAQH Publication | 2011 | CORE v5010 Master Companion Guide, 00510, 1.2 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(xiv) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 85 FR 17244 | 40 CFR 63 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills Residual Risk and Technology Review | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (i) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(44) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(2) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Coast Guard | 45 CFR 162.920(c)(3)(v) | CAQH Publication | 2011 | Phase II CORE 270: Connectivity Rule, version 2.2.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 87 FR 33316 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 61 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |