Environmental Protection Agency |
|
40 CFR 62.14105(b) |
ASME QRO-1 |
1994 |
Standard for the Qualification and Certification of Resource Recovery Facility Operators
|
American Society of Mechanical Engineers |
Food and Drug Administration |
|
21 CFR 801.410(d)(2) |
ASTM D412 |
1968 |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Diuron) |
EPA Method 553 |
1992 |
Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 161.002-4(b)(1) |
UL 864 |
1991 |
Control Units for Fire-Protective Signaling Systems
|
Underwriters Laboratories, Inc. |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A633 |
1979 |
Standard Specification for Normalized High-Strength Low Alloy Structural Steel
|
ASTM International |
Consumer Product Safety Commission |
|
16 CFR 1632.5(b)(2)(ii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (11) |
EPA Method 608 |
1982 |
Organochlorine Pesticides & PCBs by GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.852(a)(5) Table |
APHA Method 9223 B |
1997 |
Enzyme Substrate Coliform Test, Enzyme Substrate Test
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(a) |
ASTM D7430 |
2011 |
Standard Practice for Mechanical Sampling of Coal
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 195.432(c) |
API 510 |
1997 |
Pressure Vessel Inspection Code
|
American Petroleum Institute |
Coast Guard |
|
40 CFR 60.106(j)(2) |
ASTM D1266 |
1991 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 59.110(a)(2) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
|
ASTM International |
Energy Department |
|
10 CFR 430 Subpart B, App. M, 2.6, a |
ASHRAE 116 |
2005 |
Methods for Testing for Rating for Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Coast Guard |
|
46 CFR 54.01-5(g) Table 54.01-5(b) Note 1 |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
USGS I-4668-98 |
1998 |
Determination of Arsenic and Selenium in Water and Sediment by Graphite Furnace-Atomic Absorption Spectrometry
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (2,4,5-TP (Silvex)) |
EPA Method 515.1 |
1995 |
Chlorinated acids Liquid/Liquid and GC/ECD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.56c(b)(13) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
ASME B16.29 |
1986 |
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings--DWV
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 89, Subpart D, Appendix D, Table 4 |
ASTM D445 |
2009 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
|
ASTM International |
Coast Guard |
|
46 CFR 160.151-15(f) |
IMO LSA Code |
2010 |
Life Saving Appliances, including LSA Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 1066.310(b)(7)(ii) |
SAE J-1263 |
2010 |
Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques
|
Society of Automotive Engineers |
Coast Guard |
|
40 CFR 136.3(a) Table IA |
EPA Method 1680 |
2010 |
Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium
|
U.S. Environmental Protection Agency |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C1048 |
1991 |
Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass
|
ASTM International |
Coast Guard |
|
36 CFR 1238.14(c) |
ISO 18901 |
2002 |
Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability
|
International Organization for Standardization |
Research and Special Programs Administration |
|
18 CFR 38.2(a)(12) |
NAESB Publication |
2009 |
Business Practices for Measurement and Verification of Wholesale Electricity Demand Response
|
North American Energy Standards Board Wholesale Electric Quadrant |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
ASTM D3953 |
1991 |
Standard Specification for Strapping, Flat Steel and Seals
|
ASTM International |
Coast Guard |
|
46 CFR 56.01-2(b)(4) |
ANSI/ASME B16.15 |
1994 |
Cast Bronze Threaded Fittings, Classes 125 and 250
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 141.21(f)(3) Note |
APHA Method 9221 A |
1999 |
Multiple-Tube Fermentation Technique for Members of the Coliform Group
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.9110(f)(6) |
OECD No. 423 |
1996 |
Guidelines for the Testing of Chemicals, Acute Oral Toxicity—Acute Toxic Class Method
|
Organization for Economic Cooperation and Development |
Environmental Protection Agency |
|
40 CFR 147.1450(a)(1) |
NVUIC regulations |
1987 |
Nevada Revised Statutes [NRS], Volume 25, Chapters 445.131 through 445.354, Inclusive
|
State of Nevada |
Rural Utilities Service |
|
7 CFR 1755.900(b)(1) |
RUS Bulletin 345-3 |
1972 |
Acceptance of Standards, Specifications, Equipment Contract Forms, Manual Sections, Drawings, Materials and Equipment for the Telephone Program
|
Rural Utilities Service, U.S. Department of Agriculture |
National Highway Traffic Safety Administration |
|
49 CFR 571.205(a) S6.4 |
ANSI Z26.1 |
1977 |
Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
|
American National Standards Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(68) |
ANSI/API Spec. Q1 |
2008 |
Specification for Quality Programs for the Petroleum and Natural Gas Industry
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 121.240(d) |
ABYC A-1 |
1993 |
Marine Liquified Petroleum Gas (LPG) Systems
|
American Boat and Yacht Council |
National Highway Traffic Safety Administration |
|
49 CFR 572.124(a) |
Drawing No. 127-2000 |
1994 |
Upper Torso Assembly
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Terbufos) |
EPA Method 614.1 |
1993 |
The Determination of Organophosphorus Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 300.915(f)(9) |
ASTM D1293 |
1990 |
Standard Test Method for Pour Point of Petroleum Oils
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 80.47(a)(10) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.274(d)(3) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
|
United Nations |
Food and Drug Administration |
|
21 CFR 184.1301(b) |
Food Chemicals Codex |
1981 |
Ferric Phosphate
|
National Academy Press |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.7(c)(2) B6 |
API RP 1162 |
2003 |
Public Awareness Programs for Pipeline Operators
|
American Petroleum Institute |
Federal Aviation Administration |
|
14 CFR 71.71(f) |
FAA Order 7400.9X |
2013 |
Airspace Designations and Reporting Points
|
Federal Aviation Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1918.103(b)(1)(ii) |
ANSI Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 435.15 Note 11 |
EPA Method 1674 |
2011 |
Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2)
|
U.S. Environmental Protection Agency |
Food and Drug Administration |
|
21 CFR 137.250(b)(1)(i) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (33) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Silver) |
APHA Method 3111 B |
1999 |
APHA Standards On-line, Metals by Flame Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(iii)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.15(a) |
Drawing No. SA 103C 052 |
1976 |
Forearm Hand Assembly Right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Coast Guard |
|
21 CFR 172.340(b) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |