This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75.6(a)(49) | ASTM D 5453 | 2006 | (DUP) Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine, Fuel, and Engine Oil by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(i) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 160.133-7(b)(2) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181(c) | Drawing No. 175-0000, Sheet 2 of 6 | 2008 | Weights of body segments (head, neck, upper and lower torso, arms and upper and lower segments) and the center of gravity location of the head | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(K) | EPA Method 265.2 | 1978 | Rhodium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1426(f)(8)(ii)(B) | ASTM D 1250 | 2013 | Standard Guide for Petroleum Measurement Tables | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 720 | 1989 | Spray Applied Fibrous Insulation for Elevated Temperature | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1016 | 1988 | Performance Requirements for Individual Thermostatic Pressure Balancing and Combination Control for Bathing Facilities | American Society of Sanitary Engineering | |
Mine Safety and Health Administration | 30 CFR 57.5001(a) | ACGIH Publication | 1973 | TLV's Threshold Limit Values for Chemical Substances in Workroom Air Adopted by ACGIH for 1973 | American Conference of Governmental Industrial Hygienists | |
Research and Special Programs Administration | 49 CFR 178.74(c)(5)(ii) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 172.372(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 147.1750(a)(3) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-03 (General Rules, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.5935 Low Flame Spread/Low Smoke Products | ASTM E 662 | 2015 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.4 | ASTM D 4017 | 1990 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Coast Guard | 46 CFR 175.400 Corrosion-resistant material or corrosion-resistant | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(12) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.128(c)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 110.10-1(g)(2) | IEC 60331-11 | 1999 | Tests for electric cables under fire conditions—Circuit integrity—Part 11: Apparatus—Fire alone at a flame temperature of at least 750 °C, First Edition | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.16(a)(1) | Drawing No. SA 103C 002(B) | 1987 | Title not specified | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | AGA All Standards | 2013 | All specifications, standards and codes without specific reference | American Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (54) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1750(a)(1) | NDUIC regulations | 1987 | North Dakota Century Code, Chapter 38-08 (Control of Gas and Oil Resources, 1987 and Supp. 1989); | State of North Dakota | |
Coast Guard | 46 CFR 28.830(b) | UL 217 | 1985 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 98.7(e)(24) | ASTM D 4809 | 2006 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 524 | 1988 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(E)(2) | ASME B&PV Code | 1980 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(13) | ANSI B30.5, 5-1.9.3 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Outriggers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (molybdenum) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.154(b)(5) | APHA Method 2540 G | 1998 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples | American Public Health Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1292 | 1999 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment | ASTM International | |
National Highway Traffic Safety Administration | 9 CFR 325.13(a)(7) Footnote 1 | USDA MP Form 91 | 1979 | Diagram 1 of the Meat Denaturing Guide | U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 1060.810(b) Table 2 | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-12A, 8.4.4 | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1503 | ACGIH Guidelines | 2010 | Industrial Ventilation: A Manual of Recommended Practice for Design | American Conference of Governmental Industrial Hygienists | |
Minerals Management Service | 30 CFR 250.1628(c) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 40 CFR 60, Appendix A-5, Method 13A, Section 16.1 | ASTM D 3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.53(b) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 54.01-5(g) Table 54.01-5(b) Note 1 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 63 | HCC Method 10360 | 2011 | Luminescence Measurement of Dissolved Oxygen in Water and Wastewater and for Use in the Determination of BOD5 and cBOD5. Revision 1.2 | Hach Chemical Company | |
Food and Drug Administration | 21 CFR 178.3770(a)(4) Footnote 1 | NIST Circular 484 | 1949 | Spectrophotometry | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.174-3(b) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S6.7.1 | SAE RM-66-04 | 1995 | Compatibility Fluid | Society of Automotive Engineers | |
Coast Guard | 33 CFR 154.808(b) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.4141(b)(3) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(78) | API Standard 65 | 2010 | Part 2, Isolating Potential Flow Zones During Well Construction; Second Edition | American Petroleum Institute | |
Consumer Product Safety Commission | 16 CFR 1201.2(c) | Publication | 1970 | Test Methods and Recommended Practices | ASTM International | |
Coast Guard | 46 CFR 160.151-15(f) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization |