Coast Guard |
|
46 CFR 111.60-3(a)(2) |
UL 1309 |
1995 |
Standard for Marine Shipboard Cable
|
Underwriters Laboratories, Inc. |
National Highway Traffic Safety Administration |
|
49 CFR 571.106 S6.10.2(a) |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 56.01-2(d)(3) |
ASME B&PV Code |
1998 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 141.40(a)(3) Table 1 (total chromium) |
ASTM D5673 |
2010 |
Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 61.18(a)(14) |
ASTM E50 |
1990 |
Standard Method Practice for Apparatus Reagents, and Safety Precautions for Chemical Analysis of Metals
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(20) |
ANSI B30.5 |
1968 |
Safety Code for Crawler, Locomotive and Truck Cranes
|
American National Standards Institute |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.708(c)(2) |
ISO 535 |
1991 |
Paper and Board--Determination of Water Absorptiveness--Cobb Method
|
International Organization for Standardization / International Electrotechnical Commission |
Coast Guard |
|
40 CFR 136.3(a) Table IG (Alachlor) |
EPA Method 531.1 |
1995 |
Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1.
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.335(b)(10)(ii) |
ASTM D1072 |
1980 |
Standard Test Method for Total Sulfur in Fuel Gases
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.3981, Subpart MMMM, Appendix A, Section 3.4 |
ASTM D6053 |
2000 |
Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.105a(g)(2) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (63) |
APHA Method 3111 B |
1999 |
Metals by Flame Atomic Absorption
|
American Public Health Association |
Coast Guard |
|
46 CFR 160.061-1(a)(1) |
FedSpec QQ-W-423 |
1969 |
Wire, Steel, Corrosion-Resisting
|
Federal Specifications Standards and Test Methods |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (2) |
ASTM D1067 |
2006 |
Standard Test Method for Acidity or Alkalinity of Water
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 178.338-1(c) |
ASME B&PV Code |
1992 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (18) Nitrate |
ASTM D3867B |
1990 |
Standard Test Methods for Nitrite-Nitrate in Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.17(g)(124) |
ASTM D3178 |
1989 |
Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
|
ASTM International |
Coast Guard |
|
46 CFR 56.01-2(e)(76) |
ASTM F1172 |
2010 |
Fuel Oil Meters of the Volumetric Positive Displacement Type
|
ASTM International |
Coast Guard |
|
46 CFR 56.85-10 Table 56.85-10 |
ASME B&PV Code |
1989 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
|
American Society of Mechanical Engineers |
Rural Utilities Service |
|
7 CFR 1755.902(e)(4)(ii) |
ICEA S-87-640 |
2006 |
Standard for Optical Fiber Outside Plant Communications Cable, 4th edition
|
Insulated Cable Engineers Association |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG Footnote 3 |
EPA Method 547 |
1990 |
Glyphosate by Direct Aqueous Injection by Post-column Derivitization and HPLC/Fluorescence
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 445.2(m) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
National Highway Traffic Safety Administration |
|
49 CFR 572.83 |
Drawing No. LP 1049-1 through LP1049-16 |
1979 |
9-month old Dummy Components and Parts
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.117(c) |
ASTM D1153 |
1977 |
Standard Specification for Methyl Isobutyl Ketone
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(u)(3) |
SAE J-386 |
1981 |
Operator Restraining Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
Food and Drug Administration |
|
21 CFR 177.1635(c)(1) |
FDA Publication |
1989 |
Gas Chromatographic Determination of PMS and PET in PPMS Basic Polymers
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Coast Guard |
|
46 CFR 160.174-3(b) |
ASTM D1004 |
1994 |
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 98.244(b)(4)(viii) |
EPA Method 8015C |
2007 |
Nonhalogenated Organics By Gas Chromatography, Revision 3
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 160.077-19(c)(15) |
UL 1517 |
2012 |
Hybrid Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
Coast Guard |
|
46 CFR 160.026-6(d) Table 160.026-6(d)(2) |
USPHS Publication 956 |
1965 |
Drinking Water Standards
|
U.S. Public Health Service, U.S. Department of Health and Human Services |
Rural Utilities Service |
|
7 CFR 1755.390(a)(6) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Coast Guard |
|
46 CFR 56.95-10(c)(1)(i) |
ASME B&PV Code |
2001 |
Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers
|
American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(74) |
ISO 13628-2:2006 |
2006 |
Petroleum and natural gas industries—Design and operation of subsea production systems—Part 2: Unbonded flexible pipe systems for subsea and marine application
|
International Organization for Standardization |
Coast Guard |
|
45 CFR 162.920(c)(1)(iii) |
CAQH Publication |
2011 |
Phase I CORE 154: Eligibility and Benefits 270/271 Data Content Rule, version 1.1.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Energy Department |
|
10 CFR 431.76(c)(1) |
UL 727 |
1994 |
Oil-Fired Central Furnaces
|
Underwriters Laboratories, Inc. |
Nuclear Regulatory Commission |
|
10 CFR 50.73(b)(2)(ii)(F)(1) |
IEEE 803 |
1983 |
Recommended Practice for Unique Identification in Power Plants and Related Facilities
|
Institute of Electrical and Electronics Engineers |
Minerals Management Service |
|
30 CFR 250.114(a) |
API RP 505 |
2002 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2
|
American Petroleum Institute |
Environmental Protection Agency |
|
40 CFR 63.997(e)(2)(iii) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
Public Health Service |
|
42 CFR 37.44(g) |
AAPM Report No. 74 |
2002 |
Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
National Archives and Records Administration |
|
36 CFR 1238.14(d)(2) |
NAPM IT2.19 |
1994 |
American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) |
EPA Method 525.1 |
1988 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 160.156-7(b)(23) |
IMO Resolution A.760(18) |
1993 |
Symbols Related to Life-Saving Appliances and Arrangements
|
International Maritime Organization |
National Highway Traffic Safety Administration |
|
40 CFR 136.3(a) Table IB (16) |
USGS I-2187-85 |
1985 |
Chloride, Ferric Thiocyanate automated
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (9) |
ASTM D3086 |
1990 |
Test Method for Organochlorine Pesticides in Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.2551(a)(2) |
WYUIC regulations |
1990 |
Title 30, Chapter 5, Wyoming Statutes, sections 30-5-101 through 30-5-126 (June 1983 and Wyoming Statutes Annotated, July 1990 Supp.)
|
State of Wyoming |
Coast Guard |
|
46 CFR 160.057-1(a)(2) |
NIST Report 4792 |
1956 |
Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Occupational Safety and Health Administration |
|
29 CFR 1910.266 Appendix C Table |
ISO 3449 |
2013 |
Earth-moving machinery -- Falling-object protective structures -- Laboratory tests and performance requirements
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 261.22(a)(2) |
EPA Method 1110 A |
2004 |
Corrosivity Toward Steel
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.131(c)(1) Table (DPD Colorimetric) |
APHA Method 4500-Cl G |
2014 |
Residual Chlorine by Spectrophotometric, DPD
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 1, 14(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |