Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (40) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 176.11(a) |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 799.9539(b) |
OECD No. 474 |
1977 |
Guidelines for the Testing of Chemicals, Mammalian Erythrocyte Micronucleus Test
|
Organization for Economic Cooperation and Development |
Occupational Safety and Health Administration |
|
29 CFR 1926.300(b)(2) |
ANSI B15.1 |
1958 |
Safety Code for Mechanical Power Transmission Apparatus
|
American National Standards Institute |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 173.420(a)(2)(i) |
ANSI N14.1 |
1990 |
Packaging of Uranium Hexafluoride for Transport
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (44) |
EPA Method 604 |
1982 |
Phenols by GC/FID
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 282.84(d)(1)(i)(A) |
NDUSTP |
1995 |
North Dakota Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of North Dakota |
Rural Utilities Service |
|
7 CFR 1755.890, Appendix A (III)(5)(c) |
ASTM D4565 |
1990 |
Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.11) |
ACS Publication |
1979 |
Safety in Academic Chemistry Laboratories
|
American Chemical Society |
Environmental Protection Agency |
|
40 CFR 80.47(o)(2)(i) |
ASTM D6299 |
2013 |
Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table Note 3 |
ASTM Annual Book of Standards |
1996 |
Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02
|
ASTM International |
Coast Guard |
|
46 CFR 133.03 |
IMO SOLAS |
1992 |
International Convention for the Safety of Life at Sea
|
International Maritime Organization |
Rural Utilities Service |
|
7 CFR 1728.202(b)(2) |
AWPA M3 |
2005 |
Standard Quality Control Procedures for Wood Preserving Plants
|
American Wood Protection Association |
Coast Guard |
|
33 CFR 164.03(b) |
CIA 3 |
1980 |
Standard Test Methods for Fiber Rope Including Standard Terminations
|
Cordage Institute |
Food and Drug Administration |
|
21 CFR 184.1930(b) |
Food Chemicals Codex |
1981 |
Vitamin A
|
National Academy Press |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(b)(4)(i) |
NRC Regulatory Guide 1.84 |
2010 |
Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35
|
U.S. Nuclear Regulatory Commission |
Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(5)(ii) |
ANSI Addenda B31.10a |
1969 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 11.1.1 |
EPA Method 6020 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 75.6(d)(2) |
GPA 2261 |
2000 |
Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography
|
Gas Processors Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(7) |
API 1104 |
1968 |
Standard for Welding Pipelines and Related Facilities
|
American Petroleum Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (40) |
EPA Method 300.1 |
1997 |
Ion chromatography - anions, Revision 1.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (13) Fluoride |
APHA Method 4500-F B |
1998 |
Fluoride Distillation
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
APHA Method 4500-SO4(2-) E |
1998 |
Sulfate, Turbidimetric Method
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart IIII, Appendix A, Section 2.1 |
EPA-450-3-88-018 |
1988 |
Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations
|
U.S. Environmental Protection Agency |
Housing and Urban Development Department |
|
24 CFR 3280.404(e) |
AAMA 1704 |
1985 |
Voluntary Standard Egress Window Systems for Utilization in Manufactured-Housing
|
American Architectural Manufacturers Association |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 108A, 7.1.1 |
ASTM D1193 |
1991 |
Standard Specification for Reagent Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 98.7(e)(14) |
ASTM D2502 |
2004 |
Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils From Viscosity Measurements
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 160.171-3(b) |
ASTM D1004 |
1994 |
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 1037.610(a) |
USEPA Publication |
2012 |
Greenhouse Gas Emissions Model (GEM) simulation tool, Version 2.0.1
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 136.3(b)(7)(iv)(B) |
EPA Method 608.2 |
1993 |
The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
National Highway Traffic Safety Administration |
|
49 CFR 571.205(a) S5.1.1.1 |
ANSI Z26.1a |
1980 |
Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
EPA Method 903.1 |
1980 |
Radium-226 Radon Emanation Technique
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.4415(a)(1) |
ASTM D4057 |
2000 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
Food and Drug Administration |
|
21 CFR 137.180(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-16 |
1989 |
Electric Navigation Lights
|
American Boat and Yacht Council |
Coast Guard |
|
46 CFR 199.70(b)(2)(iii) |
IMO Resolution A.760(18) |
1993 |
Symbols Related to Life-Saving Appliances and Arrangements
|
International Maritime Organization |
Minerals Management Service |
|
30 CFR 250.1004(b)(9) |
API RP 14C |
2007 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
Research and Special Programs Administration |
|
49 CFR 179.100-7(a) |
ASTM A537/A 537M |
1991 |
Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.91(a)(1) |
Drawing No. 126-0008 |
1992 |
Construction of the Newborn Infant Dummy
|
Reprographic Technologies |
Energy Department |
|
10 CFR 430 Subpart B, App. F, 3.2.3 |
IEC 62301 |
2005 |
Household electrical appliances—Measurement of standby power
|
International Electrotechnical Commission |
Coast Guard |
|
46 CFR 162.050-25(c) |
UL 913 |
1976 |
Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations
|
Underwriters Laboratories, Inc. |
Coast Guard |
|
46 CFR 12.02-11(d)(1) |
STCW Code |
1995 |
Seafarer's Training, Certification and Watchkeeping Code
|
International Maritime Organization |
National Highway Traffic Safety Administration |
|
49 CFR 571.208 S15.3.6(a)(1) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-47 |
1987 |
Upper leg assembly, right
|
General Motors Corporation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (70) |
EPA Method 627 |
1997 |
The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(c)(3) |
API RP 2SM |
2001 |
Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring
|
American Petroleum Institute |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 178.55(d)(3) |
CGA C-3 |
1994 |
Standard for Welding on Thin-Walled Steel Cylinders
|
Compressed Gas Association |
Occupational Safety and Health Administration |
|
29 CFR 1926.1433(c)(2)(iii) |
SAE J-1063 |
1993 |
Cantilevered Boom Crane Structures--Method of Test
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (79) |
ASTM D4657 |
1998 |
Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005)
|
ASTM International |