This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.41(k) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 85.2122(a)(8)(ii)(B) | SAE J-549A | 1979 | Preignition Rating of Spark Plugs | Society of Automotive Engineers | |
Coast Guard | 46 CFR 182.130 | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63.99(a)(30)(iv) | NH State Regulations | 2003 | New Hampshire Regulations Applicable to Hazardous Air Pollutants | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 147.1850(b)(2) | OKUIC regulations | 1973 | Oklahoma Statutes Annotated title 63 sections 1-101 to 1-114, 1-901 to 1-911, 1-1601 et seq., 1-1701, 1-2001 to 1-2014 (West 1973 and Supp. 1982) | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (5)(c) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S7.19 | SAE J-972 | 2000 | Moving Barrier Collision Test | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.1402(a) | ASC X12N 276/277 | 2000 | Health Care Claim Status Request and Response | Washington Publishing Company | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(5)(ii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix D | ANSI S1.11 | 1976 | Specification for Octave, Half-Octave, and Third Octave Band Filter Sets | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 178.44(m)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.902(r)(15)(iv)(A) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Coast Guard | 46 CFR 10.223(c)(3)(iv) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b)(1)(ii) | Drawing No. C-1709 | 1993 | Neck transducer, Revision D | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (63) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(7) | SAE J-1930 | 2002 | Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms—Equivalent to ISO/TR 15031-2 | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F 1236 | 1996 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Coast Guard | 46 CFR 56.60-2(c)(2) | ASTM A 376/A 376M | 1996 | Seamless Austenitic Steel Pipe for High Temperature Central-Station Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.209(i)(1) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(12) | ASME B30.14, Section 14-3.2.3 | 2004 | Side Boom Tractors, Moving the Load, paragraphs (j), (l), and (m) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (74) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(c)(1)(v) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry, Version 1.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 17.0(9) | ASTM D 2928 | 1971 | Standard Method for Sampling Stacks for Particulate Matter | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1006 | 1992 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications | ASTM International | |
Coast Guard | 46 CFR 111.105-1 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | EPA Method 300.1 | 1997 | Ion chromatography - anions, Revision 1.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(j)(1) | GPA 2172 | 2009 | Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis | Gas Processors Association | |
Consumer Product Safety Commission | 16 CFR 1232.2 | ASTM F2613-19 | 2019 | Standard Consumer Safety Specification for Children's Chairs and Stools | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890, Appendix A (III)(5)(b) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Federal Energy Regulatory Commission | 18 CFR 284.12(a)(1)(vii) | NAESB Publication | 2006 | Internet Electronic Transport Related Standards | North American Energy Standards Board | |
Coast Guard | 46 CFR 154.1400(b)(4) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.914(a) American Table of Distances | IME Publication 2 | 2022 | American Table of Distances for Storage of Explosives | Institute of Makers of Explosives | |
Rural Utilities Service | 7 CFR 1728.202(c)(3) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0011 | 1996 | Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.40(b)(1) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Archives and Records Administration | 36 CFR 1234, Appendix B, 2.h | NFPA 20 | 1996 | Standard for the Installation of Centrifugal Fire Pumps | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (51) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 200.925c(c)(3) | ICBO Unform Plumbing Code | 1991 | Uniform Plumbing Code | International Conference of Building Officials | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 52.742(a)(1) | ASTM D 1475 | 1985 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Food and Drug Administration | 21 CFR 101.9(c)(1)(i)(B) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Energy Department | 10 CFR 431.105(d)(2)(iii) | ASTM D 2156 | 1980 | Standard Method for Smoke Density in Flue Gases from Burning Distillate Fuels | ASTM International | |
Minerals Management Service | 30 CFR 250.803(b)(9)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.151-27(a) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(vii) | EPA-600-R-92-129 | 1992 | Methods for the Determination of Organic Compounds in Drinking Water-Supplement II | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b) Appendix (4) | EPA-600-R-94-111 | 1994 | Methods for Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.354(h)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers |