This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.11120(a)(1)(i) | CAARB Vapor Recovery Test Procedure TP-201.1E | 2003 | Leak Rate and Cracking Pressure of Pressure/Vacuum Vent Valves | California Air Resources Board | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-528R | 1987 | Sliding knee assembly, right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (1,1,1-Trichloroethane) | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.46(c)(2) | ASTM D 1826 | 1977 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Federal Communications Commission | 47 CFR 2.950(b) | ISO/IEC Guide 65 | 1996 | General requirements for bodies operating product certification systems | International Organization for Standardization | |
Occupational Safety and Health Administration | 14 CFR 150.13(c) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(25) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 10 | 1988 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.2(a) | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.01-2(d)(15) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(25) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(66) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-4(b) | DWG No. F-49-6-5 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph U-201 | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 21 CFR 177.1050(d) | FDA Publication | 1989 | Infrared Spectrophotometric Determination of Polymers Extracted from Borex 210 Resin Pellets | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Critical Radiant Flux | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(11) | Food Chemicals Codex | 1996 | Atomic Absorption Spectrophotometric Graphite Furnace Method, Method I | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1595(b) | Food Chemicals Codex | 1981 | Pepsin | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix F Human Factors II (b)(7)(i) | OET Bulletin 65 | 1997 | Evaluating Compliance With FCC Guidelines For Human Exposure To Radio frequency Electromagnetic Fields | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(e) Table II Footnote 6 | ASTM D 7365 | 2009 | Standard Practice for Sampling, Preservation, and Mitigating Interferences in Water Samples for Analysis of Cyanide | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.935(d)(4)(ii)(A)(1) | ASQ Q9000-1 | 1994 | Quality Management and Quality Assurance Standard Guidelines for Selection and Use | American Society of Quality Control | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 3 | EPA Method 607 | 1982 | Nitrosamines by GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Prometryn) | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.74(d)(1)(i)(B) | MSUSTP | 1996 | Mississippi Statutory Requirements Applicable to the Underground Storage Tank Program | State of Mississippi | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 2 | 1991 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(w)(1) | IME Publication 2 | 1964 | American Table of Distances for Storage of Explosives | Institute of Makers of Explosives | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(A) | ASTM A 569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 3173 | 2008 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Food and Drug Administration | 21 CFR 131.115(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G) | EPA-600-4-79-020 | 1983 | Methods of Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | AOAC Method 993.14 | 1998 | Chromium-Total, mg/l | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(8) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 166 | 2002 | Section 3, Angle Valve Guidelines for Chlorine Bulk Transportation | Chlorine Institute, Inc. | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(iii) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S10.4.2.1 | SAE J-826 | 1980 | Devices for Use in Defining Vehicle Seating Accommodations | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 21 CFR 172.320(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(117) | ASTM D 3173 | 1973 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(3)(iii)(B) | 42 CFR 84 | 2014 | Approval of Respiratory Devices | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 164.015-4(g)(1) | FedSpec C-C-91D | 1983 | Candle, Illuminating | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.060-5(c) | Drawing No. 160.060-1, Sheet 6 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYS | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.173(a) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |