| Environmental Protection Agency |
|
40 CFR 58 |
EPA-454-R-98-004 |
1998 |
Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 184.1472(a)(2)(iii) |
AOCS Method Cd 3-25 |
1989 |
Saponification Value
|
American Oil Chemists Society |
| Environmental Protection Agency |
|
40 CFR 63.772(h)(4)(iii)(B)(3) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1616.2(b) |
NIST PS 54 |
1972 |
Body Measurements for Sizing Girls Apparel (formerly CS 153-48)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Coast Guard |
|
46 CFR 160.076-31(c)(6) |
UL 1180 |
2009 |
Fully Inflatable Recreational Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(4) |
RUS Bulletin 345-55, PE-61 |
1973 |
Specification for Central Office Loop Extenders and Loop Extender Voice Frequency Repeater Combinations
|
Rural Utilities Service, U.S. Department of Agriculture |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.925(b)(3)(ii) |
NACE RP-0502 |
2002 |
NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology
|
National Association of Corrosion Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(8) |
API MPMS |
2005 |
Chapter 3, Section 1A
|
American Petroleum Institute |
| Coast Guard |
|
40 CFR 136.3(a) Table IA |
EPA Method 1007.0 |
2002 |
Mysid, Mysidopsis bahia, Survival, Growth, and Fecundity Test Method
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.74(a) |
Drawing No. SA 106C 030 |
1996 |
Thorax Assembly
|
Reprographic Technologies |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(12) |
SAE J-394 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
|
Society of Automotive Engineers |
| Food and Drug Administration |
|
21 CFR 176.170(b)(2) |
FDA Publication |
2002 |
Determination of Free Phenol in Cyclized Rubber Resin
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 114.600(b) |
ANSI A17.1 |
1984 |
Safety Code for Elevators and Escalators, including supplements A 17.1a and b-1985
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.85(b)(1) |
Drawing No. LP 1049-59 through LP1049-63 |
1979 |
9-month old Dummy Components and Parts for Head-Neck
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IF (4-methyl-2-pentanone (MIBK)) |
EPA Method 524.2 |
1995 |
Volatile Organic Compounds GC/MS Capillary Column
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.1251(a)(1) |
MSUIC regulations |
1988 |
Mississippi Code Annotated, section 5-9-9 (Supp. 1988)
|
State of Mississippi |
| Coast Guard |
|
46 CFR 108.105(c)(1) |
IMO Resolution A.520(13) |
1983 |
Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements
|
International Maritime Organization |
| Rural Utilities Service |
|
7 CFR 1755.390(l)(3) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 7225 |
2005 |
Gas Cylinders--Precautionary Labels
|
International Organization for Standardization |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(84) |
API MPMS |
2009 |
Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 3—Proving Reports; First Edition, reaffirmed 2009; i
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (101) |
EPA Method 610 (GC) |
1982 |
Polynuclear Hydrocarbons by GC/FID
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.131(b)(1) Table |
APHA Method 4500-ClO2 E |
2000 |
Chlorine Dioxide, Amperometric Method II
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(60) |
ASTM D5192 |
2009 |
Standard Practice for Collection of Coal Samples from Core
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.41b Natural gas (2) |
ASTM D1835 |
1997 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(10)(iv), Table H-26 |
ASME B&PV Code |
1956 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 105.14(d)(3) |
UL 19 |
2001 |
Standard for Safety—Lined Fire Hose and Hose Assemblies
|
Underwriters Laboratories, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(36) |
NFPA 51A |
2006 |
Standard for Acetylene Cylinder Charging Plants
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 15.1105(a)(1) |
STCW Code |
1978 |
Seafarer's Training, Certification and Watchkeeping Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 266, Appendix IX, 1.8(b) |
EPA Method 0060 |
1996 |
Determination of Metals in Stack Emissions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
AGA Report No. 3, Part 1 |
1990 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines
|
American Gas Association |
| Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(1)(iii) |
SAE J-395a |
1972 |
Minimum Performance Criteria for Rollover Protective Structures for Track-Type Tractors and Track-Type Front-End Loaders
|
Society of Automotive Engineers |
| Research and Special Programs Administration |
|
49 CFR 176.5(b)(8) |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 1065.1010(e)(14) |
ISO 14597 |
1997 |
Petroleum products--Determination of vanadium and nickel content--Wavelength-dispersive X-ray fluorescence spectrometry
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 56.01-2(d)(25) |
ASME B31.1 |
2001 |
Power Piping ASME Code for Pressure Piping
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 11 |
EPA-821-R-11-004 |
2011 |
Analytic Methods for the Oil and Gas Extraction Point Source Category
|
U.S. Environmental Protection Agency |
| Mine Safety and Health Administration |
|
30 CFR 75.818(b)(1) |
ASTM F496 |
1997 |
Standard Specification for In-Service Care of Insulating Gloves and Sleeves
|
ASTM International |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B16.1 |
1998 |
Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (65) |
EPA Method 375.2 |
1993 |
Sulfate (Colorimetric, Automated, Methylthymol Blue, AA II), Revision 2.0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 16 |
HCC Method 1001 |
1934 |
Differential Pulse Anodic Stripping Voltametry for Lead
|
Palintest LTD |
| Environmental Protection Agency |
|
40 CFR 282.86(d)(1)(i)(A) |
OKUSTP |
1995 |
Oklahoma Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Oklahoma |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) D3 |
ASME B31G |
2004 |
Manual for Determining the Remaining Strength of Corroded Pipelines
|
American Society of Mechanical Engineers |
| Food and Drug Administration |
|
21 CFR 178.3870(f)(6)(ii) |
FDA Publication |
2004 |
Determination of Softening Point of Solid Resins
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 160.151-33(c) |
IMO Resolution MSC.293(87) |
2010 |
Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (6) |
APHA Method 3120 B |
1999 |
Metals by Inductively Coupled Plasma
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(13)(i)(R) |
AOAC Method 973.56 |
1998 |
Phosphorus in Water
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AAMA 1102.7 |
1989 |
Voluntary Specifications for Aluminum Storm Doors
|
American Architectural Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 270.310(d)(3) |
EPA-450-2-81-005 |
1981 |
Air Pollution Training Institute Course 415: Control of Gaseous Emissions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Food and Drug Administration |
|
21 CFR 136.110(d) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |