This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 154, Appendix B, 8.4 | ASTM F 1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(3) | Lloyd's Publication | 1998 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 80.580(e)(1)(iv) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079 | 2012 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(5) | ASME B30.14, Section 14-1.7.2 | 2004 | Side Boom Tractors, General Requirements—Exhaust Gases | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (70) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1659 | 2014 | The Determination of Dazomet in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 272.1 | 1971 | Silver (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(ii) | ASTM D 5373 | 2008 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(9) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1050(a)(4) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 03, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E 711 | 2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | 1983 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.002-1(a)(3) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.3.3 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Coast Guard | 46 CFR 95.01-2(b)(1) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(vi)(B) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215(a)(2) | State of Illinois | |
Environmental Protection Agency | 40 CFR 92.113 Table B113-1 | ASTM D 613 | 1995 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.7, b | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.20-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(7) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886B | 2008 | Standard Test Methods for Nickel in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(49) | ASTM D 5453 | 2006 | (DUP) Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine, Fuel, and Engine Oil by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(i) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(1) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-21(m) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.705(b)(3) | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 2004 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(5) | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 172.372(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Consumer Product Safety Commission | 16 CFR 1203.4(p) | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 552.2 | 1995 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Extraction, Derivatization and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 1996 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Defense Department | 32 CFR 2002.14(c)(4) | NIST SP 800-53 | 2013 | Security and Privacy Controls for Federal Information Systems and Organizations | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1050 | 2005 | Standard Specification for Rubber Insulating Line Hose. | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.218(d)(4) | ANSI B31.1.0 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 1 | ASTM D 3302 | 1991 | Standard Test Method for Total Moisture in Coal | ASTM International | |
Coast Guard | 46 CFR 113.05-7(a) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Research and Special Programs Administration | 49 CFR 195.3(c) B12 | API 2000 | 1998 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.890(i)(12) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.128(c)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.113(a)(2) | Drawing No. 78051-301 | 1987 | Neck cable | General Motors Corporation | |
Labor Department | 41 CFR 50-204.68 | CGA G-5.2 | 1966 | Standard for Liquefied Hydrogen Systems at Consumer Sites | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 176.11(a) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 46 CFR 28.830(b) | UL 217 | 1985 | Single and Multiple Station Smoke Detectors | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 98.7(e)(24) | ASTM D 4809 | 2006 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 524 | 1988 | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products | ASTM International |