This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 114.600(b) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Food and Nutrition Service | 21 CFR 165.110(b)(4)(iii)(I)(3)(i) | EPA Method 552.1 | 1992 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Ion Exchange Liquid-Solid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.010-5(b)(4) | MIL-P-40619A | 1968 | Plastic Material, Cellular Polystyrene | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.17(g)(61) | ASTM D 1552 | 1995 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.405(e) | AAMA 1702.2 | 1995 | Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing | American Architectural Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1000(f)(1) | CA State Regulations | 2013 | State of California Construction Safety Orders, Division 5, Section 6312 | State of California, Department of Industrial Relations | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (10) | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 178.3770(b)(2) | ASTM D 1386 | 1978 | Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Food and Nutrition Service | 21 CFR 172.155(c) | FIL-IDF Standard 140A | 1992 | Cheese and Cheese Rind--Determination of Natamycin Content--Method by Molecular Absorption Spectrometry and By High-Performance Liquid Chromatography | International Dairy Federation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173, Appendix H, 3 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 27.211(f)(1) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 169.529(mm) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency | |
Federal Communications Commission | 47 CFR 52.26(a) | NANC Publication | 1997 | Local Number Portability Administration Selection Working Group Report including Appendices | North American Numbering Council | |
Coast Guard | 46 CFR 108.649(g) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Energy Department | 10 CFR 431.12, General purpose motor (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Food and Drug Administration | 21 CFR 177.1637(b)(2) | ECC Method ECD-A-AC-G-V-1-5 | 1988 | Determination of Dilute Solution Viscosity of Polyesters | Eastman Chemical Company | |
Coast Guard | 46 CFR 160.132-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(1) | NHTSA Publication | 2009 | Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(D) | EPA Method 218.6 | 1994 | Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.585(f)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(b)(1) | ANSI X3.54 | 1986 | Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.200(a)(1) | ARUIC regulations | 1976 | Arkansas Water and Air Pollution Control Act, Act 472 of 1949 as amended, Arkansas Statutes Annotated sections 82-1901 through 82-1943 | State of Arkansas | |
Rural Utilities Service | 7 CFR 1755.405(c)(5) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(4) | ANSI A11.1 | 1965 | Practice for Industrial Lighting | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 27.613(d)(4) | MIL-HDBK-23 | 1973 | Structural Sandwich Composites | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 147.350(a)(2) | CTUIC regulations | 1990 | Connecticut General Statutes Annotated, Title 22a (Environmental Protection), Chapter 446K | State of Connecticut | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3840 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.12045 | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 98.7(e)(32) | ASTM D 6751 | 2008 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Coast Guard | 46 CFR 107.205(b) | ABS Publication | 1998 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (16) | ASTM C 150 | 1977 | Standard Specification for Portland Cement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Animal and Plant Health Inspection Service | 7 CFR 300.2(b) | USDA Handbook 188 | 1991 | Dry Kiln Operator's Manual | U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 98.314(f) | ASTM D 5373 | 2008 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(2) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, Medium screw base | ANSI C81.61 | 2003 | Electrical Lamp Bases--Specifications for Bases (Caps) for Electric Lamps | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(2) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.405(c)(2)(ii)(J) | ANSI/NFPA 70 | 2014 | National Electrical Code, Article 400, Table 400-4 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | DOE HASL-300 | 1990 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 111.15-2(b) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 49 CFR 193.2013(e)(1) | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.4 | ASTM D 1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.90(b)(1) | Drawing No. 126-0000-0015, 0017-0027 | 1992 | Drawing numbers 126-0000 through 126-0015 (sheets 1 through 3), 126-0017 through 126-0027, and a parts list, Parts List for CAMI Newborn Dummy, Construction of the Newborn Infant Dummy | Reprographic Technologies |