This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.705(l)(1) | UL 569 | 1995 | Pigtail and Flexible Hose Connectors for LP-Gas | Underwriters Laboratories, Inc. | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(1) | SAE J-100 | 1995 | Class ‘A’ Vehicle Glazing Shade Bands | Society of Automotive Engineers | |
Energy Department | 10 CFR 431.15(b)(1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(40) | ASTM D 5798 | 2013 | Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines | ASTM International | |
Rural Utilities Service | 7 CFR 1755.405(g)(3) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 200.945(a)(1)(ii) | ASTM D 1335 | 1967 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1)(iv) | NQA-1 | 1992 | Quality Assurance Requirements for Nuclear Facilities, 1986 Edition through the 1992 Edition | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(15) | SAE J-397 | 1969 | Critical Zone Characteristics and Dimensions for Operators of Construction and Industrial Machinery | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 59 | ASTM D 6888 | 2009 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394a | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Coast Guard | 46 CFR 111.60-6(a) | UL 1581 | 2003 | Reference Standard for Electrical Wires, Cables, and Flexible Cords | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61.18(a)(14) | ASTM E 50 | 1990 | Standard Method Practice for Apparatus Reagents, and Safety Precautions for Chemical Analysis of Metals | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(ii) | ASTM D 1072 | 1980 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(iii) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
Coast Guard | 40 CFR 60.435(d)(1) | ASTM D 1475 | 1980 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 4468 | 1985 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry | ASTM International | |
Coast Guard | 46 CFR 160.151-21(u) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 182.420(c) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 571.205 S5.4 | ANSI/SAE Z26.1 | 1996 | Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways | Society of Automotive Engineers | |
Research and Special Programs Administration | 21 CFR 176.170(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 65.147(a)(4)(i)(A) | ASTM D 1946 | 1977 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.2.1.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-5(e)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Maritime Organization | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (23) | APHA Method 4500-CN C | 1999 | Cyanide, Total After Distillation | American Public Health Association | |
Coast Guard | 46 CFR 28.335(b) | ABYC H-25 | 1986 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Note 23 | EPA Method 1682 | 2006 | Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium | U.S. Environmental Protection Agency | |
Coast Guard | 29 CFR 1917.91(a)(1)(i)(B) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxi) | APHA Method 6440 | 2000 | Polynuclear Aromatic Hydrocarbons | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(h)(2) | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Environmental Protection Agency | 40 CFR 98.194(e) | NLA Publication | 2008 | CO2 Emissions Calculation Protocol for the Lime Industry—English Units Version, February 5, 2008 Revision | National Lime Association | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diazinon) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.1063(h) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1402(b) Maximum true vapor pressure (3) | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(m)(12) | EPA Method 8021B | 1996 | Aromatic and Halogenated Volatiles By Gas Chromatography Using Photoionization and/or Electrolytic Conductivity Detectors, Revision 2 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1020(b) | FDA Publication | 1985 | Analysis of Cycopaco Resin for Residual b-(2-Hydroxyethyl mercapto) propionitrile | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 75.6(a)(42) | ASTM D 5504 | 2001 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 534 | 1988 | Preformed Flexible Elastomeric Cellular Insulation in Sheet and Tubular Form | ASTM International | |
Coast Guard | 46 CFR 113.50-5(g) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.33(c)(2) | Drawing No. 78051-64 | 1987 | Title not specified | General Motors Corporation | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-1657 | 1970 | Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iii) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International |