This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.301b(a)(2) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Coast Guard | 46 CFR 56.70-15(g)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ASTM D 4444 | 1992 | Standard Test Method for Use and Calibration of Hand-Held Moisture Meters | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.203 S5.1(a) | SAE J-944 | 1980 | Steering Control System-Passenger Car-Laboratory Test Procedure | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3280.705(b)(3) | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Food and Drug Administration | 21 CFR 177.1630(e)(4)(v) | ASTM D 2117 | 1982 | Tentative Method of Test for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(30) | NFPA 496 | 1967 | Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-5(c)(1) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Coast Guard | 46 CFR 160.156-7(b)(5)(iii) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 28 | EPA-821-R-02-014 | 2002 | Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxv) | APHA Method 7500 | 2001 | Radium | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, A | ASTM E 1719 | 1997 | Standard Test Method for Vapor Pressure of Liquids by Ebulliometry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.224(b)(2) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Food Safety and Inspection Service | 9 CFR 317.309(c)(1)(i)(B) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(3) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-100X | 1987 | Head Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Parathion methyl) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.192(a)(3)(iii)(C) Note | NACE RP-0285 | 2002 | Recommended Practice for Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems | National Association of Corrosion Engineers | |
Environmental Protection Agency | 40 CFR 63.987(b)(3)(ii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 46 CFR 58.10-5(b)(3)(ii) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.2 | ICC/IBC | 2003 | International Building Code | International Code Council | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 1065.1010(e)(14) | ISO 14597 | 1997 | Petroleum products--Determination of vanadium and nickel content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5190-3A | 1972 | Model Airport Hazard Zoning Ordinance1 | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 154.195(b) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Housing and Urban Development Department | 24 CFR 3285.4(c)(1) | APA PS1 | 1995 | Construction and Industrial Plywood (with typical APA trademarks) | APA--The Engineered Wood Association | |
Minerals Management Service | 30 CFR 250.803(b)(1) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IV | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.105-3 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 192.147(c) | ASME B16.1 | 1998 | Cast Iron Flanges and Flanged Fittings, Classes 25, 125, 250 and 800 | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.702(e)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.24b(e)(2)(iii) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75.6(a)(15) | ASTM D 1946 | 1990 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(ix) | NOAA Tech Memo NMFS-SEFC-211 | 1988 | Biomedical Test Materials Program: Analytical Methods for the Quality Assurance of Fish Oil | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Federal Railroad Administration | 49 CFR 227 Appendix E III A | ANSI S3.6 | 2004 | Specification for Audiometers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.707(c)(1)(i) | EPA-815-R-05-002 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 2, 18(c) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 174 | 1996 | Household Electric Storage Tank Water Heaters, Tenth Edition with 1997 Revisions | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.335(a)(3) | EPA Method 3A | 2014 | Determination of Oxygen and Carbon Dioxide Concentrations in Emissions From Stationary Sources (Instrumental Analyzer Procedure) | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 100.201 Building entrance on an accessible route | ICC/ANSI A117.1 | 1998 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (4) | EPA Method 603 | 1982 | Acrolein and Acrylonitrile by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table Note 4 | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.18(c)(3)(i)(A) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Communications Commission | 47 CFR 25.146(a)(1) | ITU Radio Regulations, Volume 1: Articles, Article 21 | 2016 | Terrestrial and space services sharing frequency bands above 1 GHz,” Section V, “Limits of power flux-density from space stations | International Telecommunication Union--Telecommunication | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(7)(iv) | ASTM D 2036 | 1991 | Standard Test Method for Cyanides in Water | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-574B | 1976 | Insulation, Thermal (Perlite) | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 118(a) | MSS SP-75 | 2004 | Specification for High-Test Wrought Butt Welding Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Health and Human Services Department | 45 CFR 162.1802(b)(1) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 | National Council for Prescription Drug Programs | |
Energy Department | 10 CFR 430.2, Definitions, Ballast efficacy factor | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(viii) | ASTM E 695 | 1991 | Standard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading | ASTM International |