This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.4900(b)(4)(v) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 315 | 1993 | Seamless Copper Alloy Pipe Tube | ASTM International | |
Coast Guard | 46 CFR 56.15-1(e) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg B | 1998 | Magnesium, Calculation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7420 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Public Health Service | 42 CFR 52b.12(c)(9) | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice | American Conference of Governmental Industrial Hygienists | |
Research and Special Programs Administration | 49 CFR 195.3(c) B8 | API RP 652 | 1997 | Lining of Aboveground Petroleum Storage Tank Bottoms | American Petroleum Institute | |
Coast Guard | 40 CFR 444.12(b)(1) Table (3) | APHA Method 3500-Cr D | 1995 | Chromium by Colorimetric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (1) | EPA-600-4-79-020 | 1979 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.417(a)(1)(iii) | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1996 | U.S. Supplement to ABS Rules for Steel Vessels for Vessels of International Voyages | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 98.7(e)(8) | ASTM D 1826 | 2003 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(viii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.36(f) | Drawing No. 78051-317 | 1994 | Chest deflection transducer assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (45) | EPA Method 252.2 | 1978 | Osmium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3690(b)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.3 | 1999 | Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(2) | ACI 318R | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Environmental Protection Agency | 40 CFR 1048.110(g)(2) | ISO 14230-4 | 2000 | Road vehicles—Diagnostic systems—Keyword Protocol 2000—Part 4: Requirements for emission-related systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(d)(7) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(4) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Coast Guard | 46 CFR 197.204, ASME Code | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethyl acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2251(a)(1) | UTUIC regulations | 1990 | Utah Code Annotated, 1953, section 40-6-1 through 40-6-18, as amended 1988 and Cumm. Supp. 1990 | State of Utah | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (3)(b) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 183.810(a)(2) | ABYC A-16 | 1989 | Electric Navigation Lights | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.1 | APHA Method 605 | 1977 | Tentative Method of Analysis for Plutonium Content of Atmospheric Particulate Matter | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.2100(a)(1) | SDUIC regulations | 1983 | South Dakota Codified Laws, sections 45-9-2, 45-9-4, 45-9-11, 45-9-13, 45-9-14, 45-9-15 | State of South Dakota | |
Rural Utilities Service | 7 CFR 1755.890(i)(5)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.602(a)(1) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Food and Drug Administration | 21 CFR 131.120(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 572.131 Table A | Drawing No. 880105-300 | 2002 | Upper Torso Assembly | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.633(h)(1) | ASTM D 86 | 1990 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 2784 | 1989 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM D 4329 | 1999 | Standard Practice for Fluorescent UV Exposure of Plastics | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1060.810(c) Table 3 | California Code of Regulations | 2004 | Final Regulation Order, Article 1, Chapter 15, Division 3, Title 13 | California Air Resources Board | |
Coast Guard | 33 CFR 127.107(c) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-33(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (94) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 321.8 | 1997 | Determination of Bromate in Drinking Waters by Ion Chromatography Inductively Coupled Plasma - Mass Spectrometry, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61.18(e)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
Mine Safety and Health Administration | 30 CFR 77.503-1 | ICEA Publication | 2013 | Standards | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 132.350(c)(1) | NFPA 10 | 1993 | Portable Fire Extinguishers | National Fire Protection Association |