| Environmental Protection Agency |
|
40 CFR 86.1(d)(1)(ii) |
LEV III Evaporative Emission Standards |
2012 |
Title 13, Division 3, Chapter 1, Article 2 Approval of Motor Vehicle Pollution Control Devices (New Vehicles) §1976 Standards and Test Procedures for Motor Vehicle Fuel Evaporative Emissions, effective as of December 31, 2012
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(2) |
CAARB Publication |
1996 |
California Regulatory Requirements Applicable to the National Low Emission Vehicle Program
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(3) |
California Regulatory Requirements |
2003 |
Approved on April 21, 2003, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(4) |
California Regulatory Requirements |
2007 |
Approved on November 9, 2007, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(5) |
California Regulatory Requirements |
2013 |
Title 13, Division 3, Chapter 1, Article 2, Approval of Motor Vehicle Pollution Control Devices, §1968.2 Malfunction and Diagnostic System Requirements—2004 and Sub Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(1)(i) |
LEV III Exhaust Emission Standards |
2015 |
Title 13, Division 3, Chapter 1, Article 2 Approval of Motor Vehicle Pollution Control Devices (New Vehicles), §1961.2 Exhaust Emission Standards & Test Procedures—2015 & Subsequent Model Passenger Cars, Light-Duty Trucks, & Medium-Duty Vehicles
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(e)(1) |
ISO 13837:2008(E) |
2008 |
Road Vehicles—Safety glazing materials—Method for the determination of solar transmittance, First edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 86.1(e)(2) |
ISO 15765-4:2005(E) |
2005 |
Road Vehicles—Diagnostics on Controller Area Networks (CAN)—Part 4: Requirements for emissions-related systems
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 86.1(f)(1) |
NIST Special Publication 811 |
2008 |
Guide for the Use of the International System of Units (SI)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(1) |
SAE J-1151 |
2011 |
Methane Measurement Using Gas Chromatography
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(2) |
SAE J-1349 |
2011 |
Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(3) |
SAE J-1850 |
2001 |
Class B Data Communication Network Interface
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(4) |
SAE J-1877 |
1994 |
Recommended Practice for Bar-Coded Vehicle Identification Number Label
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(5) |
SAE J-1892 |
1993 |
Recommended Practice for Bar-Coded Vehicle Emission Configuration Label
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(6) |
SAE J-1930 |
1998 |
Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(9) |
SAE J-1939-11 |
1999 |
Physical Layer—250K bits/s, Shielded Twisted Pair
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(10) |
SAE J-1939-13 |
1999 |
Off-Board Diagnostic Connector
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(11) |
SAE J-1939-13 |
2004 |
Off-Board Diagnostic Connector
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(12) |
SAE J-1939-21 |
2001 |
Data Link Layer
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(13) |
SAE J-1939-31 |
1997 |
Network Layer
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(14) |
SAE J-1939-71 |
2008 |
Vehicle Application Layer (Through February 2007
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(15) |
SAE J-1939-73 |
2006 |
Application Layer—Diagnostics
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(16) |
SAE J-1939-81 |
2003 |
Network Management
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(17) |
SAE J-1962 |
2002 |
Diagnostic Connector Equivalent to ISO/DIS 15031-3
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(18) |
SAE J-1978 |
2002 |
OBD II Scan Tool—Equivalent to ISO/DIS 15031-4
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(19) |
SAE J-1979 |
1997 |
E/E Diagnostic Test Modes
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(20) |
SAE J-1979 |
2007 |
E/E Diagnostic Test Modes
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(21) |
SAE J-2012 |
2002 |
Diagnostic Trouble Code Definitions Equivalent to ISO/DIS 15031-6
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(22) |
SAE J-2064 |
2011 |
R134a Refrigerant Automotive Air-Conditioned Hose
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(23) |
SAE J-2284-3 |
2001 |
High Speed CAN (HSC) for Vehicle Applications at 500 KBPS
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(24) |
SAE J-2403 |
2007 |
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature—Truck and Bus
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(25) |
SAE J-2534 |
2002 |
Recommended Practice for Pass-Thru Vehicle Programming
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(26) |
SAE J-2727 |
2012 |
Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(27) |
SAE J-2765 |
2008 |
Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(h)(1) |
TMC RP 1210B |
2007 |
Windows Application Program Interface
|
Truck and Maintenance Council |
| Environmental Protection Agency |
|
40 CFR 86.113-94(b)(2) |
ASTM D613 |
2013 |
Standard Test Method for Cetane Number of Diesel Fuel Oil
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.113-94(b)(2) |
ASTM D976 |
2011 |
Standard Test Method for Calculated Cetane Index of Distillate Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.113-94(b)(2) |
ASTM D86 |
2012 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.113-94(b)(3) |
ASTM D613 |
2013 |
Standard Test Method for Cetane Number of Diesel Fuel Oil
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1806-05(j)(1) |
California Regulatory Requirements |
2003 |
Approved on April 21, 2003, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1806-05(j)(2) |
California Regulatory Requirements |
2007 |
Approved on November 9, 2007, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1806-17(a) |
California Regulatory Requirements |
2013 |
Title 13, Motor Vehicles, Division 3, Air Resources Board, Chapter 1, Motor Vehicle Pollution Control Devices, Article 2, §1968.2 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 94.7(c)(1) |
ASM CS-104 UNS No. G10460 |
1985 |
Alloy Digest (Carbon Steel of Medium Carbon Content)
|
ASM International |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(2) |
ASME MFC-4M |
1997 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(3) |
ASME MFC-5M |
1994 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(4) |
ASME MFC-6M |
1998 |
Measurement of Fluid Flow in Pipes Using Vortex Flow Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(5) |
ASME MFC-7M |
1987 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(6) |
ASME MFC-9M |
2001 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(7) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |