| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(c) |
ASTM D2013/D 2013M |
2009 |
Standard Practice for Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(c) |
EPA SW-846-3050 |
1996 |
Acid Digestion of Sediments, Sludges, and Soils
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM D5865 |
2010 |
Standard Test Method for Gross Calorific Value of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM E711 |
1987 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM E711 |
2004 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM D5864 |
2011 |
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(d) |
ASTM D240 |
2009 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D3173 |
2003 |
Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D3173 |
2008 |
Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM E871 |
1982 |
Standard Method of Moisture Analysis of Particulate Wood Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM E871 |
2006 |
Standard Method of Moisture Analysis of Particulate Wood Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D5864 |
2011 |
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D240 |
2009 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D95 |
2005 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D95 |
2010 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4006 |
2011 |
Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4177 |
2010 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4057 |
2006 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4057 |
2011 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-9250 |
1986 |
Chloride (Colorimetric, Automated Ferricyanide AAI), Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
ASTM D6721 |
2006 |
Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
ASTM D4208 |
2002 |
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
ASTM D4208 |
2007 |
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-5050 |
1994 |
Bomb Preparation Method for Solid Waste, Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
ASTM E776 |
2009 |
Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-9056 |
2007 |
Determination of Inorganic Anions by Ion Chromatography, Revision 1
|
U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-9076 |
1994 |
Test Method for Total Chlorine in New and Used Petroleum Products by Oxidative Combustion and Microcoulometry, Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ASTM D5954 |
1998 |
Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ASTM D5954 |
2006 |
Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ASTM D6350 |
1998 |
Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ASTM D6350 |
2003 |
Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ISO 6978-1:2003(E) |
2003 |
Natural Gas—Determination of Mercury—Part 1: Sampling of Mercury by Chemisorption on Iodine, First edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
ISO 6978-2:2003(E) |
2003 |
Natural Gas—Determination of Mercury—Part 2: Sampling of Mercury by Amalgamation on Gold/Platinum Alloy, First edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
EPA Method 1631 |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(b) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D5192 |
2009 |
Standard Practice for Collection of Coal Samples from Core
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D7430 |
2011 |
Standard Practice for Mechanical Sampling of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
ASTM D4606 |
2007 |
Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4177 |
2010 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4057 |
2006 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4057 |
2011 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
EPA SW-846-3020A |
1992 |
Acid Digestion of Aqueous Samples And Extracts For Total Metals For Analysis By GFAA Spectroscopy, Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
ASTM D2013/D 2013M |
2009 |
Standard Practice for Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
ASTM D5198 |
2009 |
Standard Practice for Nitric Acid Digestion of Solid Waste
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
TAPPI Method T266 |
2006 |
Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absorption Spectroscopy (Reaffirmation of T 266 om-02), Draft No. 2
|
Technical Association of the Pulp and Paper Industry |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
EPA SW-846-3050 |
2013 |
Acid Digestion of Sediments, Sludges, and Soils
|
U.S. Environmental Protection Agency |