DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Types 1C1and 2C1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-6000-2(R) | 2001 | Arm Assembly | Reprographic Technologies | |
Coast Guard | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1980 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Pentachlorophenol) | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(v) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61.241 Maximum true vapor pressure (1) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.5160(c) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.5 | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.46(c)(2) | ASTM D 5865 | 1998 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Food and Drug Administration | 21 CFR 178.3770(b)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a)(2) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Coast Guard | 46 CFR 121.240(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S9.3.5 | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 160.005-1(a)(1) | FedSpec L-P-375C | 1970 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.077-19(d)(3) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 170.245(b)(9) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.35(a) | Drawing No. 86-5001-002 | 1996 | Leg Assembly, Complete, Revision A | General Motors Corporation | |
Research and Special Programs Administration | 49 CFR 178.61(d)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Rural Utilities Service | 7 CFR 1755.901(f)(1) | ITU-T Recommendation G.652 | 2005 | Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a single-mode optical fibre and cable | International Telecommunication Union--Telecommunication | |
Energy Department | 10 CFR 431.96, Table 1 | ARI 310/380 | 2004 | Packaged Terminal Air-Conditioners and Heat Pumps | Air Conditioning and Refrigeration Institute | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2019.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Rainbow Trout, Oncorhynchus mykiss, and brook trout, Salvelinus fontinalis, acute | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.133-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-3500 | 2009 | Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(viii) | EPA-821-R-02-012 | 2002 | Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(hh) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1401 Biodiesel | ASTM D 6751 | 2020 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(f)(1)(v)(C) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | AOAC Method 993.14 | 1998 | Antimony-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 147.1600(a)(2) | NMUIC regulations | 1978 | State of New Mexico Energy and Mineral Department, Oil Conservation Division—Rules and Regulations (dated 10-1-78), sections B-3, I-701 through I-708, M-1100 through M-1121 | State of New Mexico | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4184 | 1982 | Specification for Reinforced Thermosetting Resin (RTRP) Sewer Pipe (Withdrawn 1986) | ASTM International | |
Coast Guard | 46 CFR 57.05-1(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(d)(1) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(1) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Health and Human Services Department | 45 CFR 162.920(a)(7) | ASC X12N 278 | 2000 | Health Care Services Review—Request for Review and Response, Version 4010 | Washington Publishing Company | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | MIL-T-43548C | 1986 | Thread, Polyester Core: Cotton-, Rayon-, or Polyester-Covered | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Coast Guard | 46 CFR 56.01-2(d)(21) | ASME B16.34 | 1996 | Valves--Flanged, Threaded, and Welding End | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.97(b)(13) | RUS Bulletin 1728F-700 | 2011 | Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 10.223(c)(3)(iv) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 020 | 1976 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (51) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 89.327 | SAE J-1937 | 1989 | Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell | Society of Automotive Engineers |