This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(E) | EPA Method 245.1 | 1994 | Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.613(e)(3)(iii)(C) | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 52, Subpart HH | NYSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of New York (NY) | |
Coast Guard | 46 CFR 12.01-3(b)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429d | 1969 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 176.170(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/4 | 1981 | Gypsum Board and Polyurethane or Polisocyanurate Composite Board | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 147.1550(a)(2) | NJUIC regulations | 1988 | New Jersey Administrative Code, sections 7:14A-1.1 through 1.9 (subchapter 1), 7:14A-2.1 through 2.15 (subchapter 2), 7:14A-5.1 through 5.17, (subchapter 5) | State of New Jersey | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4024 | 2015 | Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C9 | ASTM D 638 | 2003 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Endrin) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.113(a)(2) | Drawing No. 78051-301 | 1987 | Neck cable | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 60.17(g)(7) | ASTM A 101 | 1993 | Standard Specification for Ferrochromium | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(15) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Food Safety and Inspection Service | 21 CFR 173.340(a)(4) | Union Carbide Publication | 1995 | Viscosity Determination of n-butoxypoly (oxyethylene) poly (oxypropylene) glycol | Union Carbide Corporation | |
Coast Guard | 46 CFR 125.180(b) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 91.227(b)(1) | FAA TSO-C166b | 2009 | Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 36 CFR 1235.4(e)(3) | ISO 9660 | 1990 | Volume and File Structure of CD-ROM for Informational Exchange | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 184.1150(b) | Food Chemicals Codex | 1996 | Bacterially-derived protease enzyme preparation | National Academy Press | |
Coast Guard | 46 CFR 111.12-7(b) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | DOE HASL-300 | 1997 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Mercury | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Federal Communications Commission | 47 CFR 87.141(g) | FAA TSO-C91a | 1985 | Emergency Locator Transmitter Equipment | Federal Aviation Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.360-4(a)(2)(i) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 739 | 1988 | Cellulose Loose- fill Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg E | 1992 | Magnesium | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7740 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
National Archives and Records Administration | 36 CFR 1234.3(g)(1) | PIMA IT9.11 | 1998 | Imaging Materials--Processed Safety Photographic Film--Storage | Association for Information and Image Management | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 9 | ASTM Annual Book of Standards | 1999 | Water and Environmental Technology--Section 11.02 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.702(e)(7) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(1) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.261(w) Ferrosilicon | ASTM A 100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Environmental Protection Agency | 40 CFR 72.13(a)(3) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Minerals Management Service | 30 CFR 250.901(d)(14) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 887 | 2012 | Standard Specifications for Personal Climbing Equipment | ASTM International | |
Coast Guard | 46 CFR 160.048-4(b) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Coast Guard | 46 CFR 76.10-10(n)(2) | UL 19 | 2001 | Standard for Safety, Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Food and Drug Administration | 21 CFR 177.1345(b)(2) | ASTM D 1525 | 1987 | Standard Test Method for Vicat Softening Temperature of Plastics | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(4)(iii) | ITU-R Recommendation M.541-8 | 1997 | Operational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service | International Telecommunication Union Radiocommunication Bureau | |
Coast Guard | 46 CFR 160.170-5(b)(6) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 1045.110(g) | SAE J-1939 | 2008 | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559A | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Direct | ASTM International |