This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 200.949(a)(2) | ASTM F 476 | 1991 | Standard Test Method for Security of Swinging Door Assemblies | ASTM International | |
Environmental Protection Agency | 40 CFR 60.704(d)(4) | ASTM D 4809 | 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(3) | PCSA 1 | 1968 | Mobile Crane and Excavator Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(6)(iii) | CGA S-1.3 | 1959 | Safety Release Device Standard--Compressed Gas Storage Containers | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Ind-01. Method EV-025 | 1993 | Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(h)(1) | TMC RP 1210B | 2007 | Windows Application Program Interface | Truck and Maintenance Council | |
Rural Utilities Service | 7 CFR 1755.405(d)(4) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 515.1R | 1985 | Guide to the Use of Waterproofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete | American Concrete Institute | |
Food and Drug Administration | 21 CFR 177.2480(c)(4) | ASTM D 2133 | 1966 | Standard Specification for Acetal Resin Injection Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2201(b)(2) | TXUIC regulations | 1978 | Texas Natural Resources Code, Chapters 81, 85-89, 91 and 141 (Vernon 1978 and Supp. 1982) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11173(e)(3) | CASCAQMD Publication | 1989 | Spray Equipment Transfer Efficiency Test Procedure for Equipment User | State of California, South Coast Air Quality Management District's | |
Health and Human Services Department | 45 CFR 162.1302(a)(2) | ASC X12N 278 | 2000 | Health Care Services Review--Request for Review and Response, Version 4010 | Washington Publishing Company | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.360-4(a)(2)(i) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(C)(1) | EPA-340-1-86-016 | 1974 | A Guide for Surface Coating Calculation | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1201.4(b)(3)(ii) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST PS 1 | 1983 | Product Standard for Construction and Industrial Plywood with Typical APA Trademarks | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.261(w) Ferrosilicon | ASTM A 100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Coast Guard | 46 CFR 160.077-21(c)(2) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 282.98(d)(1)(i)(A) | WVUSTP | 1997 | West Virginia Statutory Requirements Applicable to the Underground Storage Tank Program | State of West Virginia | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (89) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Free Chlorine) | ASTM D 1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix E, 6(4) | NCRP Commentary No. 3 | 1989 | Screening Techniques for Determining Compliance with Environmental Standards, Revision of January 1989 with addendum of October, 1989 | National Council on Radiation Protection and Measurement | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 D | 1992 | Silica, Dissolved, Heteropoly Blue Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 1065.20(a) | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | APHA Method 9222 G | 1997 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association | |
Coast Guard | 46 CFR 52.01-105(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 21 CFR 164.150(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-6 | 2001 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Motor Carrier Safety Administration | 49 CFR 393.41(b) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(vii) | RT Publication | 2009 | Parts List and Drawings, Hybrid III Six-year-old Child Test Dummy (H-III6C, Beta Version) | Reprographic Technologies | |
Public Health Service | 42 CFR 84.193 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(31) | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 131.125(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 3173 | 1973 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.2490(a) | FDA Publication | 1989 | Analysis for Dicholorbenzene in Ryton Polyphenylene Sulfide | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.14(o)(1) | NIST Handbook 44 | 1998 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.5 | NFPA 72 | 2002 | National Fire Alarm Code | National Fire Protection Association | |
Interior Department | 43 CFR 11.18(a)(2) | DOI/WRC/-84/01 | 1984 | Chapter II of Economic and Environmental Principles and Guidelines for Water and Related Land Resources Implementation Studies | U.S. Department of the Interior | |
Energy Department | 10 CFR 431.86(c)(1)(ii)(A) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(ii) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(b)(1) Note to paragraph (b)(1) | IEEE 516 | 2009 | Guide for Maintenance Methods on Energized Power Lines | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(70) | ASTM D 1835 | 2003 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(v) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute |