This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1192 | ISO 10865-1:2012 | 2012 | Americans With Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.135(a) | Drawing No. 880105-450 | 2002 | Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 4 | EPA Method 200.2 | 1994 | Methods for the Determination of Metals in Environmental Samples, Supplement I, EPA/600R-94/111 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (24) Sodium | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.41c Coal | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 071 | 1976 | Lower Leg Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(i) | SAE J-1063 | 1993 | Cantilevered Boom Crane Structures--Method of Test | Society of Automotive Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 633 | 1993 | Organonitrogen Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6406 | 2005 | Gas Cylinders--Seamless Steel Gas Cylinders--Periodic Inspection and Testing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(d)(3) | ANSI/NFPA 14 | 2014 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 12.02-11(d)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 665 | 1988 | Blanket Mineral Fiber Insulation | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.1 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
National Archives and Records Administration | 36 CFR 1234.3(c)(4) | NFPA 54 | 2002 | National Fuel Gas Code | National Fire Protection Association | |
Coast Guard | 33 CFR 155.140(d)(2) | IMO Resolution MSC.35 (63) | 1994 | Adoption of Guidelines for Emergency Towing Arrangement on Tankers | International Maritime Organization | |
Food and Drug Administration | 21 CFR 184.1979a(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Minerals Management Service | 30 CFR 250.1203(b)(2)(i) | API RP 86 | 2005 | Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | APHA Method 3111 E | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.786(b)(5) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lxvii) | APHA Method 9221 | 2006 | Multiple-Tube Fermentation Technique for Members of the Coliform Group | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, A | ASTM E 1782 | 2003 | Standard Test Method for Determining Vapor Pressure by Thermal Analysis | ASTM International | |
Coast Guard | 46 CFR 54.01-35 Note | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(i) | ASTM D 56 | 1970 | Standard Test Method for Flash Point by Tag Closed Cup Tester | ASTM International | |
Defense Department | 32 CFR 2002.14(c)(4) | FIPS PUB 200 | 2006 | Minimum Security Requirements for Federal Information and Information Systems | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. 880105-371 | 1987 | Bib simulator | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 3173 | 1987 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 265.195(f)(2) Note | NACE RP-0285 | 2002 | Recommended Practice for Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems | National Association of Corrosion Engineers | |
Coast Guard | 46 CFR 160.151-15(k) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph 201 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S10.7 | ASTM D 471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Rural Utilities Service | 7 CFR 1755.703(a)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(60) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Research and Special Programs Administration | 21 CFR 177.1630(e)(4)(iii) | FDA Publication | 1989 | General Procedure for Determining Relative Viscosity of Resin Polymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 16 | 2014 | Foam-Water Spray Systems | National Fire Protection Association | |
Public Health Service | 42 CFR 52b.12(b) | NFPA Publication | 1996 | NFPA Health Care Facilities Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1051.501(d)(1) | 40 CFR 1065, Subpart H | 2012 | Engine Fluids, Test Fuels, Analytical Gases and Other Calibration Standards | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(iv) | ASTM UOP 539 | 1997 | Refinery Gas Analysis by Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xviii)(A) | ASME B&PV Code | 1999 | Boiler and Pressure Vessel Code, Section XI, 1997 Addenda and 1998 Edition of IWA-2314, and IWA-2314(a) and IWA-2314(b) of the 1999 Addenda through the latest edition and addenda | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.043-5(b) | FedSpec QQ-M-151 | 1936 | Metals; General Specification for Inspection of | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 430.3(c)(16) | ANSI C82.13 | 2002 | American National Standard for Lamp Ballasts—Definitions for Fluorescent Lamps and Ballasts, | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(2)(i) | EPA-600-R-93-100 | 1993 | Method 300.0--Methods for the Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.707(c)(1)(iii) | EPA-821-R-01-025 | 2001 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 5, 2(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(4) | Drawing No. SA 150 M050 | 1994 | Lumbar Spine Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.1001 Note to In Light Liquid Service | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(g)(2) | ISO 3171 | 1988 | Petroleum Liquids—Automatic pipeline sampling—Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 54.20-1(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers |