Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(29) |
ANSI B56.1 |
1969 |
Safety Standard for Power Industrial Trucks
|
American National Standards Institute |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.26(b) |
SAE J-594 |
2003 |
Reflex Reflectors
|
Society of Automotive Engineers |
Rural Utilities Service |
|
7 CFR 1755.870(a)(6) |
ASTM B33 |
1991 |
Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.18(f)(3) |
ASTM D1946 |
1977 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Endrin) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60 Subpart JJJJ, Table 2, Footnote (d) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.154(a) |
Drawing No. 921022-060 |
2001 |
Torso Assembly
|
Reprographic Technologies |
Drug Enforcement Administration |
|
21 CFR 1311.08(b)(6) |
Draft NIST Special Publication 800-63-1 |
2008 |
Electronic Authentication Guideline; Burr, W. et al
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Environmental Protection Agency |
|
40 CFR 63.14(g)(79) |
ASTM D6522 |
2000 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
Energy Department |
|
10 CFR 430 Subpart B, App. D1, 2.1 |
AHAM HLD-1 |
2009 |
AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers
|
Association of Home Appliance Manufacturers |
Housing and Urban Development Department |
|
24 CFR 3280.703 |
NFPA 31 |
1997 |
Standard for the Installation of Oil-Burning Equipment
|
National Fire Protection Association |
Environmental Protection Agency |
|
40 CFR 52.741(a)(4)(viii)(B)(1) |
EPA-340-1-80-012 |
1988 |
Inspection Manual for Control of Volatile Organic Emissions from Gasoline Marketing Operations: Appendix D
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 108.427(a) |
ASTM F1121 |
1993 |
Standard Specification for International Shore Connections for Marine Fire Applications
|
ASTM International |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(a) Footnote 13 |
ASME B&PV Code |
2000 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (64) |
EPA Method 120.1 |
1982 |
Conductance (Specific Conductance, umhos at 25 degrees C)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 13 |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption, Revision 2.2
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(e)(3)(i), Table H-32 |
ASME B&PV Code |
1956 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 180.509(g)(ii) Table Note 2 |
AAR Specification M-1002 |
1992 |
AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars
|
Association of American Railroads |
Coast Guard |
|
46 CFR 160.151-31(d) |
IMO Resolution MSC.295(87) |
2010 |
Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (5) |
ASTM D5673 |
2005 |
Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(b)(13)(i)(L) |
AOAC Method 973.50 |
1998 |
Nitrogen (Nitrate) in Water - Brucine Colorimetric Method
|
AOAC International |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B 1910.165 |
ANSI/NFPA 72B |
2014 |
Auxiliary Protective Signaling Systems
|
National Fire Protection Association |
Food and Drug Administration |
|
21 CFR 177.1050(b) |
FDA Publication |
1987 |
Determination of B-Dodecylmercaplopropionitrile in NR-16 Polymer
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Energy Department |
|
10 CFR 431.134(b) |
ARI 810 |
2003 |
Performance Rating of Automatic Commercial Ice-Makers 2003
|
Air Conditioning and Refrigeration Institute |
Environmental Protection Agency |
|
40 CFR 55.14(d)(2)(i) |
40 CFR part 52, subpart C |
2010 |
State of Alaska Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
Architectural and Transportation Barriers Compliance Board |
|
36 CFR 1191, App B, 207.2 |
ICC/IBC |
2001 |
International Building Code
|
International Code Council |
Energy Department |
|
10 CFR 440 Appendix A |
ASTM C728 |
1989 |
Standard Specification for Perlite Insulation Board
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.919(b)(2) |
API RP 2A-WSD |
2007 |
Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design
|
American Petroleum Institute |
Coast Guard |
|
40 CFR 60, Appendix B, PS-1, 6.1 |
ASTM D6216 |
1998 |
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 430.01(i) Table |
EPA Method 1650 |
2014 |
Adsorbable Organic Halides by Adsorption and Coulometric Titration
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 80.580(c)(1)(i) |
ASTM D4294 |
2010 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
|
ASTM International |
Minerals Management Service |
|
18 CFR 284.12(a)(1) |
NAESB Publication |
2006 |
NAESB Standards
|
North American Energy Standards Board |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(24) |
ASTM D2161 |
1966 |
Conversion Tables for SUS
|
ASTM International |
Federal Communications Commission |
|
47 CFR 15.118(c)(2) |
EIA-IS-132 |
1994 |
Cable Television Channel Identification Plan
|
Electronic Industries Association |
Coast Guard |
|
46 CFR 129.340(d)(1) |
NFPA 70 |
1987 |
National Electrical Code
|
National Fire Protection Association |
National Highway Traffic Safety Administration |
|
49 CFR 572.133(b)(2)(iii) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Endrin) |
EPA Method 505 |
1995 |
Organohalide pesticides/PCBs (Drinking Water)
|
U.S. Environmental Protection Agency |
National Highway Traffic Safety Administration |
|
49 CFR 571.205(a) S5.1.1.3 |
ANSI Z26.1 |
1977 |
Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
|
American National Standards Institute |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(b)(2)(xviii)(B) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section XI, Paragraph IWA-2316 of the 1998 Edition through the latest edition and addenda, IWA-5211(a) and (b), 1998 Edition through the latest edition and addenda
|
American Society of Mechanical Engineers |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.7(b)(14) |
SAE J-1292 |
1981 |
Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (11) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Coast Guard |
|
33 CFR 154.106(c)(1) |
ANSI B16.5 |
1988 |
Steel Pipe Flanges and Pipe Fittings
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 147.1350(a)(1) |
MTUIC regulations |
1996 |
Montana Statutory Requirements Applicable to the Underground Injection Control Program
|
State of Montana |
Environmental Protection Agency |
|
40 CFR 63.5719(c)(4)(ii) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
ASME MFC-9M |
1988 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
National Highway Traffic Safety Administration |
|
49 CFR 571.108 S11.3 |
SAE J-2009 |
1993 |
Forward Discharge Lighting Systems
|
Society of Automotive Engineers |
Rural Utilities Service |
|
29 CFR 1926.6(y)(2) |
NFPA 13 |
1969 |
Standard for the Installation of Sprinkler Systems
|
National Fire Protection Association |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.7(b)(22)(iii) |
CIA CRS-1 |
1979 |
Polyester/Polypropylene Composite Rope Specifications, Three- and Eight-Strand Standard Construction
|
Cordage Institute |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
APHA Method 7500-U B |
2000 |
Uranium-Radiochemical Method
|
American Public Health Association |