DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (32) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 160.132-5(c)(4) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(ix) | Drawing No. 175-5500 | 2009 | Lumbar Spine Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(i)(D) | EPA Method 350.1 | 1993 | Determination of Ammonium Nitrogen by Semi-Automated Colorimetry. Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(k)(2) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.177(a)(5) | ASTM D 4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.109, Table H-22, Footnote 3 | NFPI Publication | 1964 | Definition and Test Procedures for Ammonium Nitrate Fertilizer | National Food Plant Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA | EPA Method 2000.0 | 2002 | Fathead Minnow, Pimephales promelas, Acute Toxicity Tests with Effluents and Receiving Waters | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.104(a)(4)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VII—Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.2800(a)(3) | NMIUIC regulations | 1982 | CNMI Drinking Water Regulations, Commonwealth Register, Volume 4, Number 4 | Commonwealth of the Northern Mariana Islands | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASME RTP-1 | 2015 | Reinforced Thermoset Plastic Corrosion-Resistant Equipment | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA D410A | 2004 | Panel Design Specification | APA--The Engineered Wood Association | |
Mine Safety and Health Administration | 30 CFR 57.18028(a) | DOI/BOM Instruction Guide No. 19 | 1972 | Mine Emergency Training | Bureau of Mines, U.S. Department of Interior | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(11)(iv) | EPA-600-4-79-020 | 1983 | Method 353.3--Spectrophotometric, cadmium reduction | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 42 CFR 482.41(b)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(23) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(e)(49) | ASTM D 7633 | 2010 | Standard Test Method for Carbon Black—Carbon Content | Society of Automotive Engineers | |
Centers for Medicare & Medicaid Services | 42 CFR 482.41(b)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 172.401(c)(2) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Coast Guard | 46 CFR 177.410(c)(2) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. SA-572-S4 | 1992 | Accelerometer Specification | Reprographic Technologies | |
Animal and Plant Health Inspection Service | 9 CFR 113.209(b)(1) | World Health Organization | 1996 | Laboratory Techniques in Rabies | World Health Organization | |
Coast Guard | 46 CFR 2.25-15(a)(4) | IMO Resolution A.739(18) | 1993 | Guidelines for the Authorization of Organizations Acting on Behalf of the Administration | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (6) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iv)(B) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.200(b)(1) | ANSI Z53.1 | 1968 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (52) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1141-76 | 1977 | Radium-226, dissolved. Radon emanation method | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.4415(a)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.320(b)(1) | Food Chemicals Codex | 1981 | Food Chemicals Codex, 3rd Edition | National Academy Press | |
Coast Guard | 46 CFR 160.048-1(a)(3) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3111 B | 1992 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(4) | EPA Method 1 | 1987 | Sample and Velocity Traverses for Stationary Sources | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Energy Department | 10 CFR 434.403.1 Table 403.1b | ARI 330 | 1993 | Ground-Source Closed-Loop Heat Pumps (RS-45) | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1139 | 1993 | Standard Specification for Steam Traps and Drains | ASTM International | |
Federal Communications Commission | 47 CFR 73.682(d) | ATSC A/53 | 2007 | Digital Television Standard | Advanced Television Systems Committee | |
Rural Utilities Service | 7 CFR 1755.860(m)(7)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.209(k) | CGA C-8 | 1985 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5370-9 | 1973 | Slip-Form Paving--Portland Cement Concrete | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (11) | USGS I-1125-85 | 1989 | Bromide, Hypochlorite oxidation | U.S. Geological Survey | |
Coast Guard | 46 CFR 110.10-1(o)(11) | UL 1042 | 1994 | Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.564(f)(1) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(iv) | EPA Method 1320 | 1986 | Multiple Extraction Procedure | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(e) | SAE J-595 | 2005 | Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance and Service Vehicles | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-90(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II, Part A—Ferrous Material Specifications and Part B—Nonferrous Material Specifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | ASTM D 515A | 1988 | Test Methods for Phosphorus in Water (Withdrawn 1997) | ASTM International | |
Energy Department | 10 CFR 431.12, General purpose motor (2) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association |