Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| National Highway Traffic Safety Administration | 49 CFR 571.209 S5.2(k) | SAE J-726 | 1979 | Recommended Practice, Air Cleaner Test Code | Society of Automotive Engineers | |
| Coast Guard | 46 CFR 160.171-17(e)(1)(iii) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(q)(34) | NFPA 1971 | 1975 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
| Coast Guard | 46 CFR 160.151-31(e) | IMO Revised recommendation on testing | 2010 | Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
| Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vii) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 H | 1997 | Ammonia by Flow Injection Analysis | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4500-SO4(2-) E | 1998 | Sulfate, Turbidimetric Method | American Public Health Association | |
| Food Safety and Inspection Service | 45 CFR 162.920(d)(2) | NACHA Publication | 2011 | ACH Record Format Specifications (Operating Rule 78), Part 3.1, Subpart 3.1.8 Sequence of Records for CCD Entrie | National Automated Clearing House Association | |
| Coast Guard | 46 CFR 160.115-5(b)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Drawing No. SA-572-S10 | 1987 | Force sensing device | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 908.0 | 1999 | Uranium in Drinking Water, Radiochemical Method, Revision 2.0 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60.107a(e)(2)(v) | ASTM D 5504 | 2008 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence | ASTM International | |
| Environmental Protection Agency | 40 CFR 59.508(a) | ASTM D 3074 | 2000 | Standard Test Methods for Pressure in Metal Aerosol Containers (Withdrawn 2000) | ASTM International | |
| Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.107(a)(6) | ASTM D 302 | 1975 | Specification for Ethyl Acetate (85 TO 88 Percent Grade) | ASTM International | |
| Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 1005.2.1 | ICC/IBC | 2003 | International Building Code | International Code Council | |
| Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
| Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-ClO2 D | 2014 | Chlorine Dioxide, (Reserved) | American Public Health Association | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.32(c)(4)(i) | ASME UPV Code | 1946 | Code for Unfired Pressure Vessels | American Society of Mechanical Engineers | |
| Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-2C | 1976 | Airport Design Standards--Site Requirements for Terminal Navigational Facilities | Federal Aviation Administration, U.S. Department of Transportation | |
| Mine Safety and Health Administration | 30 CFR 57.2 Explosives | 49 CFR 173.53 | 2013 | Provisions for using old classifications of explosives. | U.S. Department of Transportation | |
| Minerals Management Service | 30 CFR 250.803(b)(5)(i) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Coast Guard | 21 CFR 137.105(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Research and Special Programs Administration | 49 CFR 192.165(b)(3) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
| Rural Utilities Service | 7 CFR 1755.702(e)(6) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
| Coast Guard | 46 CFR 110.10-1(o)(14) | UL 1203 | 2004 | Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
| Food and Drug Administration | 21 CFR 178.2650(b)(1)(iii) | FDA Publication | 1977 | Atomic Absorption Spectrometric Determination of Sub-Part-Per-Million Quantities of Tin in Extracts and Biological Materials with Graphite Furnace, Analytical Chemistry, Vol 49, p. 1090-1093 | Food and Drug Administration, U.S. Department of Health and Human Services | |
| Veterans Affairs Department | 38 CFR 17.74(p) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(l)(47) | SAE RM-66-04 | 1995 | Compatibility Fluid, Appendix B to SAE Standard J1703 JAN95, Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (43) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | EPA Method 335.4 | 1993 | Determination of Total Cyanide by Semi-Automated Colorimetry | U.S. Environmental Protection Agency | |
| Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 10 | 2018 | Portable Fire Extinguishers | National Fire Protection Association | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.920(d) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 21 | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium) on DC | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 435.43 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 86.1(b)(13) | ASTM D 2700 | 2013 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel | ASTM International | |
| Coast Guard | 46 CFR 177.300(b)(2) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
| Environmental Protection Agency | 40 CFR 147.650(a)(12) | IDUIC regulations | 1983 | Rules and Regulations: Practice and Procedures, Idaho Department of Water Resources, Rules 1 through 14 (October 1983). | State of Idaho | |
| Environmental Protection Agency | 40 CFR 63.10005(i)(5)(i) | ASTM D 4177 | 2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
| Food and Drug Administration | 21 CFR 131.206(e)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec SS-S-346C | 1968 | Siding (Shingles, Clapboards, and Sheets), Asbestos Cement | Federal Specifications Standards and Test Methods | |
| Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 285 | 1978 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | ASTM International | |
| Environmental Protection Agency | 40 CFR 86.1803-01 Rated Power | SAE J-1349 | 2011 | Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
| Health and Human Services Department | 45 CFR 162.920(a)(7) | ASC X12N 278 | 2000 | Health Care Services Review—Request for Review and Response, Version 4010 | Washington Publishing Company | |
| Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(B)(3)(viii) | ASTM E 180 | 1985 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals | ASTM International | |
| Federal Communications Commission | 47 CFR 15.38(b)(3) | SCTE 54 (formerly DVS 241) | 2003 | Digital Video Service Multiplex and Transport System Standard for Cable Television | Society of Cable Telecommunications Engineers | |
| Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.7 | ASTM D 240 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
| National Highway Traffic Safety Administration | 49 CFR 571.403 S6.3.1 | ASTM B 456 | 1995 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International |