This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.11647(d) | ASTM D6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(d)(1) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C926 | 1990 | Standard Specification for Application of Portland Cement-Based Plaster | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(4) | Drawing No. SA-SID-M050 | 1994 | Lumbar Spine Assembly | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption, Revision 3.0 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(iv) | ASTM G23 | 1990 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(13) | ASTM A495 | 1994 | Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(26) | API MPMS | 2005 | Chapter 8, Section 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 177.300(c)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Minerals Management Service | 30 CFR 250.1002(b)(2) | ASME B16.5 | 2003 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 131.203(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 195.579(d) | API RP 652 | 1997 | Lining of Aboveground Petroleum Storage Tank Bottoms | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-16(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Drug Enforcement Administration | 21 CFR 1311.08(b)(1)(iii) | FIPS Publication 140-2 | 2005 | Annex C to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Random Number Generators | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 111.105-7 | IEC 60079 | 2012 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.77(a)(2)(i) | Drawing No. SA-572-S1 | 1996 | Type A accelerometer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropanol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2400(b)(3) | WAUIC regulations | 1983 | Revised Code of Washington, chapter 70.105 (Bureau of National Affairs, 1983 Laws), entitled, Hazardous Waste Disposal | State of Washington | |
Food and Drug Administration | 21 CFR 133.5(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.23 | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 395 | 2013 | Hours of Service of Drivers | Federal Motor Carrier Safety Administration, Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (98) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(40) | ASTM D3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1517(b)(1)(iii) | ASTM D7520-13 | 2013 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41b Coal | ASTM D388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | EJMA Standards | 1980 | Standards of the Expansion Joint Manufacturers Association | Expansion Joint Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 172.519(f) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Coast Guard | 46 CFR 161.010-2 | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0011 | 1996 | Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 761.60(g)(1)(ii) | ASTM D923 | 1989 | Standard Practices for Sampling Electrical Insulating Liquids | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.806(a)(2)(i) | ASME SPPE-1d | 1996 | Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61.18(a)(6) | ASTM D2359 | 1985 | Standard Specification for Refined Benzene--535 | ASTM International | |
Environmental Protection Agency | 40 CFR 600.116-12(c) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(3)(iii)(B) | 42 CFR 84 | 2014 | Approval of Respiratory Devices | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.50-40(a)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | USGS I-3735-85 | 1985 | Sodium, atomic absorption spectrometric, direct | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 1 | EPA-600-4-79-020 | 1983 | Methods for Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 104.400(b) | IMO Conference Resolution 2 | 2002 | ISPS Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-27(c)(6) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA (3) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 60 | RSC Analyst | 1980 | Spectrophotometric Determination of Ammonia: A Study of a Modified Berthelot Reaction Using Salicylate and Dichloroisocyanurate. Krom, M.D. 105:305-316 | Royal Society of Chemistry | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(vii) | ASTM E1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(7) | ASTM D1217 | 1998 | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer | ASTM International | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 2.2.11(1) | EPA-450-2-78-041 | 1978 | Measurement of Volatile Organic Compounds-Guideline Series | U.S. Environmental Protection Agency | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 478.24(b) | BATF Publication 5300.5 | 2008 | State Laws and Published Ordinances--Firearms | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
National Archives and Records Administration | 36 CFR 1235.46(c)(1) | ISO 9660 | 1990 | Volume and File Structure of CD-ROM for Informational Exchange | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0019 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies |